Electric kettles are a particular kind of tea kettle that functions as a self-contained heating system for brewing tea and other beverages. They are perfect for usage in tiny flats, especially efficiency units where cooking space is severely constrained.
Even though KitchenAid is a well-known brand with a good reputation, many people have encountered problems while using its kettles. According to users, these kettles sometimes stop working for no apparent reason.
Most problems encountered with these electric kettles can be resolved quickly. Using this article, we will go through some ways to fix a KitchenAid kettle that isn’t working. So let’s get started right away!
KitchenAid Kettle Not Working- Listing The 6 Best Solutions
Below are some fixes to try if your KitchenAid kettle is not working.
- Check Power Source
If your electric kettle does not turn on, it is suggested to check its power supply first. Make sure the kettle is plugged into an electrical outlet that works correctly.
To further verify whether it is operating properly, you can try plugging any other electrical device into the power socket. If the item is correctly positioned at its base, you may confirm after verifying the power outlet. Without being securely fastened to its base, the kettle will not operate.
- Descale The Kettle
Your kettle may have a limescale issue if it takes a long time to heat up or turn on. This is particularly true if you stay in a region with hard water. Your kettle’s lifespan can be increased by descaling it.
How Often Should The Kettle Be Descaled?
- Check out the recommendations below for typical kettle usage (boiling five times daily).
- If you reside in a region with soft water, descale your kettle once every three months.
- If you live somewhere with hard water, descale your kettle once a month.
- If you use your kettle more frequently than five times a day, you might need to descale it more regularly.
Descaling The Kettle?
Start by filling your kettle with a vinegar and water mixture, then let it come to a boil. The steps you must take are listed below.
- Mix white vinegar and water in equivalent amounts and fill the kettle.
- Allow the solution to soak all night.
- To eliminate the vinegar smell, empty the solution the following morning and rinse the kettle several times.
If your kettle was severely scaled up, you might need to repeat these instructions. Repeat steps 1-3 until all of the limescale has been removed.
- Faulty Shutdown System
Some models feature an automatic shutdown system that turns off the kettle when the water is hot enough. If this system fails for some reason, your kettle won’t likely turn on. The problem could be with the thermostat or sensors. So, get them checked by a qualified electrician.
- Inspect The Power Cord
The power cord for the kettle has to be checked. This is so you can make sure the cord doesn’t have a flaw that would cause it to be problematic. Keep an eye out for these wear-and-tear indicators while evaluating your kettle’s power wire.
- The bends in the wire
- A broken plastic casing and a live wire are visible.
If your kettle’s power cable shows any signs of damage, stop using it immediately. It will require to be fixed or replaced.
- Check Fuse
One of the essential components that can be found in almost every electric kettle is a fuse. These fuses frequently become destroyed over time. Unfortunately, it is not advised to have the fuses repaired because it is impossible to predict how long they will survive even after being fixed.
You can use a multimeter to test a fuse. If found culprit, get it replaced to fix the problem. The good news for you is that you can quickly change the fuse in your kettle with a newer one from any reputable retailer.
- Clean The Kettle
You might need to clean the appliance if the kettle is on, but the water isn’t hot. A detachable mesh filter is included with the majority of KitchenAid electric kettles. This filter needs to be cleaned to clean the kettle properly. Make sure the filter is free of any dirt or residue.
Another issue you might experience is dirty or clogged contacts. Your kettle should start working correctly again after resolving this straightforward problem.
Fine-grit sandpaper is the only piece of equipment you’ll need for this task. Use it to thoroughly clean your KitchenAid kettle. Once you have cleaned it, check to see whether it is working fine or not.
The Bottom Line
If your KitchenAid electric kettle is not functioning, consider trying the aforementioned troubleshooting methods. If the problem persists, it would be best to seek professional assistance.
Another possibility is that the entire unit might be damaged. If so, contact customer care service if the kettle is under warranty.