If you want to do a lot of cooking, the Presto pressure cookers are an excellent choice. It’s big enough to handle all your cooking needs and doesn’t cost a fortune. These pressure cookers have a great deal of capacity and are compatible with most cooktops.
They are also equipped with a pressure gauge which allows you to easily control the pressure you need for various processing. The lid can also be locked to prevent over-pressurizing the food. The pressure cooker’s gauge is not always easy to read and sometimes inaccurate.
One of the most common problems with Presto cookers is that the gauge won’t rock. However, it can be fixed if you know the reason behind it. You can go through the article below if you want to take care of these problems yourself.
How To Fix Presto Pressure Cooker Gauge Not Rocking?
- Try Turning Down the Heat
If your Presto pressure cooker gauge does not rock, try turning down the heat. The temperature inside the pot should be at the desired level. The gauge should slowly rock as it cooks. If you’ve set a high temperature, it may prevent your cooker from rocking.
You should also read the manual and follow all instructions carefully. When the gauge reaches the desired pressure, the weight on top will start to jiggle. Turn down the heat when necessary but not so low that the pressure in the container is lost.
- Check the Vent Pipe
Check the vent pipe if the Presto pressure cooker’s gauge is not rocking. If the vent pipe is too dirty, it may be clogged, affecting the pressure cooker’s ability to release steam.
In this case, you might need to clean the vent pipe. Moreover, you should also check the gasket to make sure that it isn’t loose.
- Try Maintaining Pressure
The vent pipe is one of the first things to try when your Presto pressure cooker gauge doesn’t rock. You should place the vent pipe cover directly above the body handle. If the vent pipe is blocked, clean it to clear it.
Next, you should watch the pressure coming out of the cooker. Some recipes will automatically drop pressure after a certain time, so it’s important to keep a close eye on the pressure level as you cook.
Another possible cause is the gasket. Sometimes it’s not clean, or the gasket has become damaged. If the pressure cooker doesn’t maintain pressure, the food will either be undercooked or overcooked. Either way, it will take longer to cook a dish.
- Damaged or Faulty Gauge
You may notice that the gauge on your Presto pressure cooker is faulty or damaged. The best way to ensure it is functioning properly is to have it checked for accuracy periodically. This is especially important if you live at a high altitude.
You might need to adjust the pressure in your canner to compensate for the elevation. However, if the dial gauge is off or damaged, it’s best to contact Presto’s Consumer Service Department to fix it.
- Clean the valve and the inside of the weight
If you notice that the gauge on your Presto pressure cooker is not rocking, it may be because the valve is not working properly. In this case, you should clean the valve and the inside of the cooker. Also, check the rim of the gasket and ensure there is no visible damage.
If the rim is not clean, remove it and clean it with cold water. Then, reinstall it. In addition, you should make sure that there is no food residue on the gasket. Food particles stick inside the pressure cooker’s gasket ring during the cooking process.
These particles form a layer that creates a gap between the lid and the pot. The pressure cooker won’t seal properly if these particles aren’t removed. If the gauge is not rocking, you may leak. The valve should not be too hard or brittle. If it is, you must clean it regularly.
You should clean it with a cleaning utensil every few uses. If the pressure gauge on your Presto pressure cooker is not rocking, you should first make sure you have no obstructions on the valve. If there are, try cleaning the valve after each use.
If you still have a problem with your cooker, you can buy a replacement valve online or from the manufacturer.
- Get it checked
If you notice that your cooker’s pressure gauge is not rocking, there are a few simple things you can do to ensure it is working properly. However, if these tips haven’t worked, you should get them checked. Several factors can cause this problem, and a professional can take care of those.
- Claim Warranty
It is important to check the pressure cooker gauge carefully before cooking. It should start to rock slowly when you place it on the pipe. If the gauge on your Presto pressure cooker is not rocking, and the solutions mentioned earlier haven’t helped, you may want to call Presto’s support.
They can help you out with maintenance and repair. You can even claim the warranty. The manufacturer will be happy to assist you in solving the problem.
Summing up:
If you’re cooking with a Presto Pressure Cooker, you may have problems with the pressure gauge. This is normal, and there are some troubleshooting steps you can do to solve the problem, and we’ve tried to mention them.
Hopefully, they will help you eliminate rocking problems with the gauge.