The extensive portfolio of Ge appliances has dominated the market for many years. People looking for the best performance on a budget rely on this brand for all their kitchen devices.
So, if you’re looking for a safe option that will serve your kitchen requirements for decades, then it is a good idea to browse through the Ge portfolio. You’ll likely find something that fits your budget. With that said, a few users have asked about the Ge oven F9 error code.
If you’re also struggling with a similar issue and the oven is not working as it should, then the following list of methods should help you solve this problem.
GE F9 Oven Error Code
The door lock operates automatically. If it locks and refuses to open after that, there are a few steps you need to take in order to make it work properly again.
- Clean Door Switch
The error code F9 on the Ge oven points towards a fault in the door switch. In most situations, there is nothing to worry about, and the issue is merely related to debris in the switch.
To resolve the issue, all you need do is get a wet cloth and wipe away all dirt from the door switch. Make sure to remove the power connections beforehand to avoid any issues with the electrical circuit.
After cleaning the switch thoroughly, you can close the door again, and the problem should be solved. You won’t have to follow any extensive procedures—simply cleaning the door switch should do the trick.
- Resetting Your Oven
Consider resetting the oven. This is because error code may come up by accident. To do this, turn the power of the oven off at the wall or at the circuit breaker for one minute. After that minute, turn it back on again.
If the error code no longer shows, you’ve solved the problem, but if it still shows, move on to the following step.
- Removing the Circuit Board to Check for Problems
- Check Door Lock
Once you’ve achieved the above, you must check the door lock which you find behind the control panel on the lower left-hand side. Make sure that the cam can rotate freely. (Check your instructional manual for what it looks like). If it’s working, proceed to the next step.
To dislodge the control panel, you have to open the oven door and undo the three screws underneath the panel. Remove the screws completely, being sure to store them somewhere safe against loss.
You should now be able to lift the control panel off the mounting pins, and access the area behind the control panel.
- Check Wiring
Many users have pointed out that this issue with the door switch can be traced back to faulty wiring. So, you will either need to call an expert or remove the back panel yourself to inspect the wiring cluster. Most often than not, you’ll find broken or twisted wire connected to the circuit.
To fix this, you’ll have to install a new wire and replace any broken section in the circuit. You can follow the owner’s manual to remove the panel from the oven.
Similarly, a complete wiring diagram is available in the manual, and it’s best to follow the information mentioned in the manual to make the repairs.
- Test the Door Lock
After the above steps, you should test the door lock. By this, we mean that you need to use a multimeter and test the resistance. Use your instruction manual to find the 6-pin connector on the motor for the door lock. Turn the cam to the ‘unlocked’ position.
Then you can use the multimeter to test the resistance between the first and third pins. If there’s no continuity, you have to replace lock switch 2. Then check the resistance between pins 2 and 3. If no continuity, replace lock switch 1. If there is continuity, then go on to the following step.
- Turn Off the Power and Examine the Oven
If you’re going to find what’s wrong with the oven, you’re going to have to turn the power off for a lengthier period of time. You may have to turn the circuit breaker off or turn the switch off by the wall.
If you’ve done everything else and there is nothing else you can think of, you’ll need to replace the control board entirely. See if this then solves the problem. However, it might be best to contact a professional electrician.
They may find the source of the problem without needing to replace the control board. They will also be able to wire it back in correctly should they find it needs to be replaced.
If you’re going to replace the control board, you’ll need your warranty and oven model number when you call customer support at Ge.
- Check the Thermostat
Another reason for the F9 error warning is a faulty thermostat. A thermostat switch opens or closes depending on the temperature it senses. It can get damaged when it overheats after a cleaning cycle. It’s easy to tell, because it looks melted. In other words, you can easily spot it.
It’s normally found at the back of the oven, and you can simply replace it if you have the know-how. The thermostat fuse may also have blown. It can be tested with a multimeter or checked visually for signs of damage. A fuse is normally easily replaced.
- Temperature Sensor and Bulb
Electric ovens have temperature sensors and bulbs to regulate the temperature in the oven.
However, if the temperature bulb and sensor isn’t working it may cause the oven to not heat completely which can trigger the error code. On most Ge models the sensor is a probe that’s located inside the back of the oven.
- Call Customer Support
In many cases, it’s simply best to call customer support. For instance, if there are no issues with the wiring on your Ge oven, then there is a good chance that you’re dealing with a defective door latch.
You should immediately reach out to customer support, and forward a warranty claim. That way, you won’t have to spend any extra money on a new latch, and customer support will help you navigate the documentation for the claim.
However, if your warranty has expired, you may still contact customer support to assist you with isolating the problem, and you won’t have to spend hours trying to guess the cause.
So, make sure to involve the professionals if the issue remains the same after following the above-mentioned troubleshooting methods. Just follow their instructions and keep them updated with the status of the Ge oven.
Hopefully, you’ll be able to fix the machine without having to purchase any replacement components for the oven.
Ways to Prevent Error Codes on the Ge F9 Oven
Most people often use their ovens incorrectly which can cause it to stop working. Any appliance you buy will come with an instructions manual. You must follow the guidelines in your instructions manual to prevent any errors from occurring. Your user manual will give you information on:
- How to clean your oven
- What each operation is for
- What to do if you’re experiencing problems
- Safety measures to adhere to
If you’ve followed the information in your user manual chances are it’s an internal problem and you may need to call an electrician to assist you.
Conclusion
The F9 warning sign on your Ge oven isn’t indicative of danger, but you may have to go through a number of steps to find the problem.
If you’ve followed our instructions above, and are either not qualified to test or make the changes, then it’s best you call customer support at Ge head offices to find a technician. A technician has the necessary qualifications and the equipment to do the job.
In fact, it can be dangerous to try any of the more complicated steps yourself. For instance, faulty wiring can lead to a fire. So, instead of you doing it yourself, why not get someone capable of doing the job to do so.
What’s more, if you call customer support, it may be that your oven its still under warranty and liable for a free replacement part. It’s always worth a try.
Use the tips in this article to help you solve the Ge F9 error code on your oven and remember to follow your user manual when operating your appliance.
Super article. The best I have ever encountered on-line. Thank you!!