Thermador ovens are designed with some of the most advanced features, and a control panel is one of them. The control panel allows the users to select the desired temperature, baking time, and cooking modes. In simpler words, it’s an essential part of the oven to control the oven’s features and functions. However, since these control panels are electric, they are susceptible to short circuit and other minor issues, which hinders their performance. The only solution for a faulty control panel is to remove it from the oven and get it fixed or replaced. So, let’s see how to remove the Thermador oven control panel!
How To Remove Thermador Oven Control Panel?
At this point, it’s pretty clear that a control panel holds great importance, and you have to be careful while removing it to make sure it’s not damaged further (it can result in a violation of the warranty). So, let’s see how you can remove the control panel;
- First of all, you have to disconnect the oven from the power connection – it’s recommended to turn off the power circuit at the primary junction box. Also, you must be extremely careful about the metal sheet parts because there are various sharp edges that can cause cuts.
- Once the power is disconnected, you have to take out the oven from the mountain location to make sure you can easily access the rear as well as front plenum covers.
- When you gain access to these plenum covers, just remove them and open the upper door of the oven.
- Now, take out the bottom screw from your oven’s control panel.
- Take out the mounting screw from the oven’s detent pin clip and disconnect the clip from the pin.
- The next step is to turn your latch at 90 degrees angle, as it helps align the sides with the latch catch’s cutout.
- Then, rotate the control panel assembly’s bottom to take it out and unhook the pins from the bracket slots.
- Now, unplug the yellow and orange nine-wire connectors from the oven’s relay board at P11 and P10.
- Then, unplug the P6 and P2 connectors from the oven’s display head.
This will help you remove the control panel from the Thermador oven, and you can easily get it fixed or replaced, depending on the damage. In case you need some replacement parts, it’s recommended to purchase genuine parts from the Thermador website to make sure there are no compromises on quality.
In most cases, people remove the control panel from the oven if it doesn’t work. However, before you remove the control panel, it’s recommended that you reset it. To reset the control panel, all you’ve to do is to unplug the Thermador oven from the power source and wait for a minute or two before you reconnect it. As a result, the board will be reset, and the minor problems will be automatically fixed.
To prevent damage to the control panel, it’s recommended that you keep an eye on the power connection as voltage fluctuations can damage the control panel’s electrical components.