FoodSaver is one of the best vacuum sealers available in the market. This is because they are automated machines, and all you’ve to do is to install the vacuum sealer bag to start the vacuum-sealing process.
These appliances have gained popularity because vacuum-sealed food can last 5x longer as compared to traditional methods of storage.
The vacuum sealer has been designed with dry and moist settings, so you can select the dedicated settings to vacuum-seal the dry and moist food items.
These modes are associated with dry and moist lights, so you can keep an eye on the vacuum sealer’s mode.
However, many people have been complaining about FoodSaver dry and moist lights blinking issues. So, if your vacuum sealer’s lights are also blinking, there are a few solutions that you can try!
Resolving FoodSaver Dry And Moist Lights Blinking:
1. Check The Food Item
When the lights start blinking on a vacuum sealer, the first step is to check the food item. This is because the dry mode works for preserving dry food items, such as cereal, pasta, dry fruits, and lentils.
On the other hand, the moist mode is used to store meat, poultry, seafood, and other food items with some moisture.
So, when you use the vacuum sealer for vacuum-sealing food other than what’s allowed, it can result in a blinking lights issue. The solution is to select the vacuum-sealing mode according to the food item!
2. The Moisture Content
FoodSaver has been designed with a moist mode, but many people end up vacuum-sealing the soups and stews. Unfortunately, it’s not possible.
This is because even with the moist mode, you can only vacuum-seal the meats, seafood, and poultry – you cannot use it for soups and stews.
So, check the food and make sure there is not too much moisture in the vacuum sealer bag. If you’ve made this mistake, you have to take out the food, dry the vacuum sealer bag, and add the low-moisture food.
3. Check The Bag
If the food doesn’t have too much moisture, you have to check the vacuum sealer bag. This is because a torn or punctured bag won’t be able to create a strong seal, hence the blinking lights.
The solution is to turn off your vacuum sealer and check the bag. If there are holes or tears in the bag, you have to apply duct tape in the areas to make sure the air doesn’t enter the bag and damage the seal.
However, applying duct tape isn’t a long-term solution, which is why we recommend using a new vacuum sealer bag.
In addition to blinking lights, a torn bag will lead to freezer burns in the food, and there will be bacterial growth as well. So, check the bag and change it.
4. The Lid
The vacuum sealer has to be properly closed to make sure the lights become solid and stop blinking. The first solution is to check the latch and make sure it’s in the locked position. If the latch isn’t locked, just lock it in place and try using the vacuum sealer.
However, if there is nothing wrong with the latch, it’s recommended that you check the latch for debris. The dirty latch has to be cleaned with a damp cloth, and make sure it’s dry before you reuse the vacuum sealer.
5. Gasket
Another solution is to check the gasket because the gasket has to be inserted properly. All the parts have to be inserted correctly into the vacuum sealer to make sure it works.
For this purpose, we recommend that you open the sealer’s lid and make sure the gaskets are in place. If the gaskets are loose or displaced, put them in place properly.
Secondly, you have to check the gasket for debris and grease. If the gasket appears dirty, you have to clean it with a damp cloth to make sure it fits properly.
Last but not least, if the gasket is cracked or damaged, the only solution is to take out the old gasket and install a new one. However, you must wait for a few seconds before turning on the vacuum sealer.
6. Vacuum Tubes
There are vacuum tubes in the vacuum sealer that help suck out air and moisture from the vacuum sealer bag. However, the lights will start blinking when the vacuum tubes aren’t connected properly.
The solution is to open the bottom panel of your vacuum sealer and check the vacuum tubes to make sure they are tightly connected. If they have disconnected, just reconnect them.
7. Bag’s Installation
If the bag isn’t installed in the vacuum sealer’s sealing bar properly, the lights will start blinking. In most cases, rotating the vacuum sealer bag at 90 degrees angle will help resolve this issue.
However, if it doesn’t work, you have to take out the bag and make sure you insert it into the vacuum sealer without any wrinkles. Ideally, you should flatten the vacuum sealer bag to make sure there are no wrinkles.
8. Quantity Of Food
It’s common for people to fill the vacuum sealer bag to full capacity when they are vacuum-sealing the bag – they do it to use the bag fully.
However, if the vacuum sealer bag is filled to its maximum capacity, the lights will start blinking. So, the solution is to check the bag and make sure three to five inches of empty space on the top.
Secondly, if you have to vacuum-seal the frozen food, make sure it’s fully frozen and hasn’t initiated the thawing process. This is because thawing will increase the moisture content.
9. Seal Bar
If you are overfilling the vacuum sealer bag but the lights are still blinking, there are chances that the seal bar is dirty or damaged.
For this purpose, you’ve to check the seal bar and make sure it’s cleaned from debris. You can use a damp cloth to clean the bar and reinstall it into the sealer.
However, before you turn on the vacuum sealer, make sure the seal bar is properly dried.
So, are you ready to start preserving your food?