There was a time when refrigerators were used for the sole purpose of keeping things preserved and at ideal temperatures. However, this has changed completely now. While their basic function is still very much the same, there are also many more features in modern fridges. One example of this is a water dispenser that most of them have. \While this is a great addition that’s also quite convenient, it can sometimes be a little problematic as well. One example of this is when the refrigerator water dispenser is letting out water too fast. Here’s how to fix this issue if you’re countering it.
Common Reasons and Solutions Refrigerator Water Dispenser Being Too Fast
- Blocked Water Flow
One of the main reasons behind this problem is issues with the flow of water. This is something that is usually a result of the refrigerator’s water dispenser not having been cleaned for a while. There are multiple lines across which the water flows, and any single one of these being clogged or blocked in any way results in issues like this.
That’s because the water in the clogged line ends up finding its way into other lines. This results in increased pressure and ultimately makes it so that the water comes out much faster than it usually would. Get your fridge’s manual and use its guidance to remove some parts from the appliance in order to get a better view of these flow lines and unclog them.
- Broken Water Valve
The water valve is a very important part of any water dispenser inside of a fridge. It’s responsible for keeping the entire system connected, and issues with it can lead to many dilemmas. There are two sections to this. One of these is near the water dispenser whereas the other is usually around the ice maker if your refrigerator has one.
Find both of these at the back of the fridge and inspect them with care. If everything seems to be in order, then there’s no clogs to worry about. It’s likely just an issue caused by a water valve that’s gone bad, and you’ll have to get it replaced immediately if you want the water dispenser to work.
- Peel the Rubber Covering
There is a soft rubber covering that can be found on the water dispenser of just about any fridge. This is the part of the appliance which you push the glass up against for the water to come out and pour in. It’s a simple addition, but one that offers great convenience. There’s usually not much wrong with it. But, in some cases, there might be an air pocket or debris behind it which can cause issues like this.
These issues lead to the water dispenser being much faster than it usually is. Luckily, this is something that can be fixed with ease. All you need is a couple of tools to safely remove the rubber covering and then clean behind it thoroughly. Once all of this is done, reattach the sticker and the water dispenser should be working fine again.