The “E” message on the Ninja Foodi Grill indicates an error with the grill. This message can appear for several reasons, such as a problem with the grill’s heating element or a blockage in the grill’s ventilation system.
If you see the “E” message on your Ninja Foodi Grill, don’t panic! The problem can be easily fixed in most cases, and your grill will be up and running in no time.
How to Fix Ninja Foodi Grill “E” Message Appears on Display Screen?
Here are some common causes of the “E” message on the Ninja Foodi Grill and how to fix them:
- Check the Heating Element
Check the heating element when you see the “E” message on your screen. Ensure that the heating element is turned on and that there is no damage to the element itself. If the heating element appears damaged, you will need to replace it.
But how do you tell if a heating element is damaged? Begin by looking for a few common signs that indicate damage. The most common sign is visible cracks on the heating element.
Next, look for discoloration of the heating element. If you’ve been using the heating element for a while, you can tell what the normal color looks like. If you see a brighter color or a dimmer shade, consider getting the heating element repaired.
At times, the heating element won’t heat like it usually does. By measuring the surface temperature with an infrared thermometer, you can tell if this is the case. If the temperature isn’t what it usually is, there may be a problem with the heating element.
- Testing With a Multimeter
Another thing to consider is checking whether the heating element is getting power. The best way to test this is to use a multimeter. Set the multimeter to the “resistance” setting and touch the probes to the heating element terminals.
If the multimeter doesn’t register a reading, the heating element isn’t getting power and needs to be replaced. Not all heating elements require a replacement.
In some cases, minor defects can be treated instantly. If you see any dirt or grease build-up, clean the element using a stiff brush. Make sure to unplug the grill before cleaning.
- Clear the Ventilation System
If the heating element is functioning properly, you should next check the grill’s ventilation system. The “E” message can appear if there is a blockage in the ventilation system. The easiest way to check for a blockage is to look through the grill’s venting holes.
If you see any debris, use a small brush to remove it. Be careful not to damage the ventilation holes while cleaning them. Another way to check for a blockage is by using a multimeter.
Adjust the multimeter to the “continuity” setting and touch the probes to the two terminals on the ventilation system. If the multimeter beeps, then the ventilation system is clear. If there is no continuity, there is a blockage in the ventilation system.
- Cleaning the Ventilation System
Once you’ve determined a blockage, you’ll need to remove it. The best way to do this is to disassemble the grill and clean all of the parts of the ventilation system. Consult your Ninja Foodi Grill’s manual before disassembling the grill.
If you can’t find the blockage or if the blockage is too difficult to remove, you may need to replace the ventilation system.
- Check for Grill Damage
If you’ve checked the heating element and the ventilation system and there doesn’t seem to be any problem, the next thing you should check is the grill itself. Look for any damage that could be causing the “E” message. The most common type of damage is a cracked grill.
If you see any cracks, you’ll need to replace the grill. These cracks tend to appear near the edges. Another rather ignored type of damage that can cause the “E” message is a warped grill. A warped grill can cause uneven heating and may also lead to a fire.
If you see any warping, get the grill replaced. A damaged control panel can also cause the “E” message. You’ll need to replace the control panel if it is cracked or damaged
Signs of a damaged control panel include cracks, loose buttons, and damage to the display. If you don’t see any damage to the grill, proceed to check the temperature sensor.
- Check the Temperature Sensor
The Ninja Foodi Grill has a built-in temperature sensor that monitors the grill’s internal temperature. If this sensor isn’t working properly, it can cause the “E” message to appear. The grill’s temperature sensor is located near the heating element.
This sensor tells the grill when to turn on and off. To test the temperature sensor, you’ll need to use a multimeter. Set the multimeter to the “resistance” setting and touch the probes to the sensor’s terminals. The resistance reading should be between 10k and 50k ohms.
The sensor must be replaced if the reading is outside this range. Using an infrared thermometer is another way to test the temperature sensor.
For this purpose, aim the infrared thermometer at the heating element and ensure that the grill’s internal temperature is around 350 degrees Fahrenheit. If it isn’t, it’s time to replace the temperature sensor.
If you’ve checked all of these things and you’re still getting the “E” message, there may be a problem with the control board.
- Check the Control Board
The control board is responsible for controlling all of the grill’s functions. If this board isn’t working properly, it can cause the “E” message to appear. Unfortunately, there is no surefire way to test the control board.
However, you can try swapping the control board with a new one to see if that solves the problem. You can try contacting Ninja’s customer service if you don’t have a spare control board. They may be able to help you troubleshoot the issue further.
The Bottom Line
In conclusion, the “E” message on a Ninja Foodi Grill indicates a problem with the grill. The most common reason behind this message is a blockage in the ventilation system.
However, several other potential reasons also exist, including a damaged heating element, grill, or control board. If you’re experiencing a similar problem, be sure to check all of these components before contacting customer service.
After plugging the power cord in 240V standard power socket, the control panel display showed error message E4. That it is, no other button could be operated, not even power button. No explanation in the “Owner’s Guide” except obviously “The unit is not functioning properly. Contact Customer Service”. To be precise, there is no address to “Customer Service” but only generally for visiting ninjakitchen.com.au. Moreover, one can not get access to complete Ninja technical specification!
Disappointing, poor information, unprecise, unfriendly, messy. Only at the bottom on the Guide last page I noticed that it is manufactured in China by SharkNinja LLC.