The Kenmore Refrigerator Water Dispenser is one of the best water dispensers available on the market today. However, a few common problems can prevent it from functioning. For example, it can sometimes take a long time to dispense water.
A number of issues can cause this. In this article, we’ll take a look at some straightforward steps that can resolve this problem with the dispenser.
How to Solve Kenmore Refrigerator Water Dispenser Slow?
A few different things could cause a slow Kenmore Refrigerator water dispenser. Here’s how to clear out this problem:
- Water Tube
When your Kenmore refrigerator’s water dispenser is slow to work, you might need to perform a few steps to solve the problem. First, try to ensure that the water valve is open. If the water line is tangled or broken, it will prevent the water dispenser from dispensing water at a normal rate.
Another possible problem that may cause a slow water dispenser is a frozen water tube. In some cases, the water tubes in your Kenmore refrigerator may have frozen. If this is the case, you can try to defrost the frozen tubes with high-pressure air.
This will restore the water dispenser to normal speed. Once the water line thaws, you can run the dispenser and get the water flowing again. If the water dispenser is still not functioning properly, it’s time to contact a professional.
- Water Inlet Valve
Another possible cause of a slow Kenmore refrigerator water dispenser is a damaged water inlet valve. This will cause the water flow to slow down. Moreover, low water pressure can also be a culprit.
Kenmore Refrigerator Water dispensers need a minimum of 20 psi of pressure to operate correctly, and if your water pressure is too low, you may need to consult a plumber. The water valve is the water valve if your Kenmore Refrigerator water dispenser is slow to dispense water.
It’s a small plastic bit that supplies the water to the dispenser, so you’ll want to check that. In some cases, the problem can be due to a faulty water inlet valve. The water valve may be broken. If this is the case, it may be time to replace the valve with a new one.
- House Supply
The water dispenser gets its water supply from the house. The water dispenser will run slowly if the water pressure is too low. Water pressure needs to be at least 20 PSI for the dispenser to function properly. In the case of low pressure, you need to increase the pressure in the line.
This will help ensure that the dispenser’s water is flowing freely. A low PSI can cause a slow water flow. The water pressure may be caused by substandard plumbing or buildup in your pipes.
When your water pressure drops to low pressure, it will slow down the water flow from the dispenser and cause it to stop working properly. Moreover, the problem can be something as simple as a clogged water filter. The water filter should also be changed once in a while to ensure that it’s working properly.
- Dispenser Control Board
After checking all three components, you can then move to the next step: replace the Control Board. This component provides the power needed for the dispenser system. The problem may lie within the dispenser control board. If this is the case, a professional repairman should be consulted.
Alternatively, you can try to replace the control board yourself. But remember that if you don’t have enough experience, you should leave it to a professional. Moreover, proper maintenance is essential to ensure the proper functioning of your water dispenser.
The replacement process is straightforward, but make sure to unplug your fridge before doing the work. Once you have removed the old board, locate the screws holding it in place. Install the new board, then test the water dispenser to ensure everything works properly.
- Dispenser Switch
The next possibility is that the dispenser switch is malfunctioning. A multimeter will be helpful in checking the switch. If the switch is faulty, it will prevent the dispenser from dispensing water.
Sometimes, a bad switch could even cause the entire dispenser system to malfunction. A broken or damaged dispenser switch will affect the water flow in a dispenser. A broken switch prevents the water from flowing into the dispenser.
The switch is located behind the control panel of the dispenser and is responsible for signaling the water inlet valve to turn on or off. In such a case, it is necessary to replace the switch.
- Door Switch
If you notice that the water dispenser of your Kenmore refrigerator is running slowly, you need to troubleshoot the problem. Several factors can cause this. In some cases, the door switch can be faulty.
The door switch on your Kenmore refrigerator controls the water and ice dispenser. If it is not working properly, you will need to replace it. You can test the door switch with a multimeter to make sure that it is not damaged.
Conclusion
Many people choose a Kenmore refrigerator because of the water dispenser. While it can be attractive, the water dispenser can be slow. This can lead to lower water flow and less supply.
Luckily, most refrigerator water dispensers can easily be fixed by following simple troubleshooting steps. Sometimes, a simple fix is all that is needed to get your dispenser back to normal.