The Hamilton food processor is one of the best investments that you will make. It comes with a range of attachments designed to improve functionality and reduce the amount of time required for you to cook your favorite meals.
However, problems with your food processor are serious and need to be handled quickly. Because all of the components are designed to work in tandem, with one component being removed or added according to what you want to make, you must get it fixed carefully.
If your Hamilton beach food processor has stopped working, then you must rethink what you were doing when your food processor stopped working properly. Were you chopping a hard or thick piece of meat? Or is it any hard pulse that you were processing in the appliance?
The food processor comes with a range of instructions that you need to follow, and if you don’t, you are going to face problems.
The reason could be a burnt motor due to excessive load. However, there is an alternate possibility that your appliance didn’t start at all when you took it out of your cabinets.
Like all other electrical devices, your Hamilton Beach food processor is susceptible to a myriad of problems. Understanding what caused the issue in the first place is the first step to fixing it properly.
Hamilton Beach Food Processor Not Working
Before you get started with the troubleshooting guide (as given below), it might be a wise idea to run a quick check of the following points.
- First of all, you must see that your food processor is plugged into the socket and that the socket is working properly.
- Secondly, check if the power source is fine and has a continuous power supply; otherwise, you may want to consider replacing the sockets.
- Check if the power cable of your appliance has any damage. If yes, then get it replaced right away. You should absolutely avoid using the appliance with a damaged power cord.
Now, before you implement any of the fixes given in this guide, you need to make sure that you remove the power cable from your appliance.
Please do not leave it plugged in because that could indicate a serious problem.
6 Easy Ways to Troubleshoot the Problem
1. First of all, check that the bowl and lid of your Hamilton Beach food processor are placed properly. Check if the lid is locked. If the lid has any problem while locking up, there must be some damage to the lid lock.
The lid is made of plastic, and there’s no way to “fix” it. Your only option is to replace the lid in this instance.
2. Check all the buttons of your appliance. If any of the buttons are depressed or stuck to their position, try to lift it to its original position. Otherwise, you can get it repaired by a nearby shop.
It’s not a wise move to pry it open on your own, as that could lead to serious problems. It’s recommended that you avoid placing excessive pressure on the appliance or its buttons, as that could lead to serious damage.
3. There is a possibility that you have used your food processor extensively, which has caused it to heat up. Let your appliance sit for a while so that it can cool down before using it again.
Overheating can cause major damage to your appliance, and it’s one of the reasons why these appliances come with built-in protection. The appliance has a powerful motor that is likely to heat up due to consistent usage. You need to avoid using it for long periods of time.
4. There is a pulse light on your food processor, which flashes when your Hamilton Beach food processor gets overheated. If this is the case, then stop using your food processor for some time until the flashlight turns off.
5. There is a chance that the motor of your appliance has gotten locked. If the light remains on or flashes, then press the off button to reset your motor. It would be best if you did that to unlock the motor.
6. You must also make sure that you have not pressed more than one button simultaneously because it can cause your machine to jam up. If you have pressed several buttons together by accident, lift them and make sure that only one remains pressed.
However, there are some instances in which your food processor may start working, but it may not perform as best as it could. The Hamilton Beach food processor is an excellent purchase and is designed to help you prepare your food in the best possible manner.
Food Processor not Shredding/Slicing Properly
- The first thing that you must check is the ingredients you are slicing or shredding are suitable for your appliance.
- Check the manual for all the tips mentioned for making sure that you use it to the best of your capabilities.
- Ensure that your appliance’s disc is positioned in the Process Position and not in the Storage Position before you start using it.
There are plenty of other issues that might arise, but it’s best not to tinker with your Hamilton Beach food processor all that much.
Instead, if you face a serious problem, we recommend that you get it fixed by a professional. There are expert electricians and appliance repair technicians that you can approach for the fix.
If it’s a sensitive component that needs fixing, it’s recommended that you take it to the shop. Let a professional look over your food processor and give you an estimate for the costs.
It’s recommended that you let a professional look it over, then tamper with it on your own and cause some irreversible damage in the process.
If the processor is covered under warranty and you feel that you did not cause the problem, it’s best to take it back to their store and let them fix it for you.