Bluestar ovens are an automatic choice for many homeowners, thanks to their excellent features and construction. However, you can occasionally run into niggles while using these ovens.
If you’ve ever had the misfortune of dealing with a broken oven, then you know how frustrating the entire event can be. Not only are you forced to deal with the expense of repairs or replacement, but you also have to go without your favorite cooking appliance for a while.
To help you avoid this headache, we’ve compiled a list of the most common oven problems and their solutions.
Regularly Encountered Bluestar Oven Problems
1. The Oven Won’t Turn On
If your Bluestar oven doesn’t turn on, begin by checking the power source. Ensure the oven is plugged into an outlet and the circuit breaker hasn’t been tripped. Figure out if there’s an issue with the socket by plugging in another appliance.
If the outlet appears fine, the problem may lie with the oven itself. Check to see if there’s a blown fuse or tripped circuit breaker. If so, you’ll need to replace the fuse or reset the breaker.
If everything looks fine on the power front, the problem may be with the wiring. Check if there is a burned-out fuse or loose wire. If the fuse has blown out, get it replaced to fix the issue.
If you’re not comfortable dealing with electrical issues, it’s best to call a repairman.
2. The Oven Won’t Heat Up
Another issue faced by the Bluestar oven users is that the oven doesn’t heat up. Though this problem is not very common, there are still a few reported cases where users have complained about their ovens not heating up.
Let’s find out what could be the possible reasons for this issue:
Faulty Igniter
One of the most common reasons behind this problem is a faulty igniter. The igniter is what heats the oven to the required temperature. If it is not working properly, the oven will not heat up.
To identify a faulty igniter, you must check if the igniter glows when the oven is turned on. If it doesn’t, then that’s probably why your oven isn’t heating up. To fix this, you need to replace the igniter.
Faulty Thermostat
The oven thermostat could also be why your oven isn’t heating up. The thermostat helps control the temperature of the oven. If it is not working properly, the oven will not heat up to the desired temperature.
To identify a faulty thermostat, check if the oven is heating up to the set temperature. If it isn’t, there might be a problem with the thermostat.
These are the most common reasons your oven might not heat up. If you have checked all these and still cannot find the problem, then it is best to call a technician.
3. The Oven Door is Jammed
If your oven door is jammed shut, there are a few useful tips you can try to open it. First, check the hinges to see if they are loose. If they are, tighten them with a screwdriver.
Next, try pulling on the door while turning the knob. If this doesn’t work, try using a putty knife to pry the door open. If none of these methods work, you may need to get in touch with a professional to have the door fixed.
4. Oven Door Won’t Close Properly
At times the Bluestar Oven door may not close properly. This can be due to a few things. Commonly the door hinges may require a readjustment. To get this done, ensure the oven is turned off and cooled completely.
Then, open the door and look at the hinges to see if they need to be tightened or loosened. If they need to be drawn, use a screwdriver to tighten the screws on the hinge.
Another thing that may cause the door not to close properly is a damaged gasket. The gasket is the black rubber seal that goes around the door. If it is damaged, it will need to be replaced. Sometimes, the door itself may be warped and must be replaced.
Your oven light may sometimes refuse to go off even when the door is closed. While this can be annoying, it’s usually not a cause for alarm. In most cases, you can fix the problem without calling a technician.
One of the most common reasons why an oven light won’t turn off is because the switch is faulty. You can check the switch using a multimeter. If found faulty, you will need to replace it.
Another reason your oven light may not be turned off is that something is blocking the sensor. The sensor is located near the light, telling the oven when to turn the light on and off.
If something is blocking the sensor, the oven cannot turn off the light. To fix this, consider cleaning the sensors.
The Bottom Line
These are some of the most common Bluestar oven problems you may face, along with their potential solutions. While some of them can be fixed easily, others may require the help of a professional.
Either way, it is always best to be prepared for any eventuality.