When it comes down to barbecuing the food, it goes without saying that a Blackstone griddle is the most preferred choice. This is because it’s a versatile addition to your outdoor kitchen or backyard. Ranging from eggs to bacon, pancakes to chicken, fish to potatoes, and fried rice to hamburgers, a Blackstone griddle can be used to cook anything you want. However, for the griddle to work properly, it has to heat up. On the other hand, if the Blackstone flame is not high and is limiting the cooking function, let’s see what can be done to fix the flame!
Why Is Blackstone Flame Not High?
1. Are You Using It For The First Time?
If you are using the Blackstone griddle for the first time (the griddle is brand-new), there are high chances that you haven’t assembled the griddle properly, or you haven’t followed correct assembly instructions. For this reason, we suggest that you read the instruction manual and follow every instruction correctly. On the other hand, if you cannot understand something, you can call the company’s customer support to gain an understanding. Once the setup is complete, you will be able to turn on the griddle, and the flame will be high.
2. Propane Tank Is Turned Off
In case your Blackstone griddle is old and the flame won’t go high, it’s likely that you haven’t turned on the propane tank. You need to ensure that the propane tank is opened up from the valve. For those who don’t know, the propane tank has a valve that’s set in the off position by default, so just put it in the open position when connected to the griddle and try using the griddle again. However, you should always turn on the propane tank slowly.
3. Propane Tank Could Be Empty
Another common reason behind the low flame of the Blackstone griddle is the low level of fuel in the propane tank. This is because the griddle will not heat up, and the flame won’t become high when the propane tank is empty. For this reason, you need to check the tank and make sure there is enough fuel in it. These tanks are loaded with propane fuel, which is a gas transformed into liquid to operate the grills and griddles. Keep in mind that propane fuel is extremely flammable, which is why the griddle leverages a controlled burn for heating the griddle.
To be certain about the fuel level in the propane tank, you have to weigh it and make sure it’s more than seventeen pounds. This is because seventeen pounds is the base weight of the tank, and this weight shows that there is no fuel in the tank. So, if that’s the case, you have to get it refilled from the fuel station. For future reference, you should always keep a spare propane tank at home to make sure your cooking process is not halted.
4. Ignition Errors
Ignition is one of the most important components of the Blackstone griddle, which is basically a spark that initiates the fire that heats up the griddle. In the majority of cases, the ignition is battery-operated, which is why replacing the battery will help optimize the flame level. The installation position of the battery varies with the brand and model you are using, so just consult the manual. If you use the griddle regularly, you will have to change the batteries after every three to four months to make the ignition works properly. On the other hand, if you have changed the batteries recently, make sure that it is tightly installed – you can even take out the batteries and add them again.
5. Burners
Blackstone griddles are integrated with multiple burners which are supplied with the burning propane to keep the burner burning with the flame. On the other hand, if the flame is not high, there are chances that the burners are clogged. To resolve this problem, you need to turn off your griddle and take out the burners and check them out. If the burners are clogged, you can use sharp needles for clearing the clogging. Once the burners are clean, install them again and try turning on the flame.
These are some simple steps that you can try. However, if the flame is still low, just get help from your griddle manufacturer’s customer support.