The washers are important for every home because it’s more convenient and cost-effective because renting the washers can be pretty expensive, especially if you have to clean multiple loads in a week. For this reason, people opt for Whirlpool washers because of durability and quality standards. On the other hand, many users struggle with leaking water from the washer’s bottom. So, if you have purchased a washer and are wondering, “why is my Whirlpool Cabrio washer leaking water from the bottom?” we have all the troubleshooting methods to help you out!
Why Is My Whirlpool Cabrio Washer Leaking Water From The Bottom?
The Reasons & Fixes For Leaking Bottom
When it comes down to the Whirlpool washers, they are meant to be the most durable and reliable models for washers, but they are still susceptible to the problem. So, if your washer is showing the same issue, we have various reasons and solutions that can help.
1. Hose
First of all, you would know that the washer is designed with a water hose that’s connected at the bottom or behind the washer. For this reason, when the bottom starts leaking water, you need to check for the hose. To be honest, you are lucky if there is a hose issue because you can fix it instantly as it only requires reconnection of the hose. For this purpose, you need to disconnect the washer from the power connection and lay down the washer. Now, look for the hose and make sure it is properly connected to the respective part. On the other hand, if the hose has come out loose, simply connect it tightly, and you will be good to go.
2. Drain Pump
A drain pump in the washer is designed to pump out water from the machine. Having said that, when it is damaged and cracked, it will start leaking water, and water will keep leaking from the underside. Keep in mind that repairing the washer’s drain pump is not a reliable option, and it’s best that you replace it. Truth be told, these pumps are affordable to replace, and you will be able to find the replacement part from the hardware stores. In fact, if you have a Whirlpool store around, you can also visit their store to get a drain pump. All in all, when it is damaged, replace it and make sure you make proper connections so it doesn’t come out loose.
3. Bearing Kit & Tub Seal
Another potential reason behind leaking water from underneath is the torn tub seal. This is because when a tub seal starts leaking water, water will start leaking through the tub bearings and tub seal. As a result, the bearings are likely to fail. Having said that, when the washer’s tub seal starts leaking water, you must replace the tub bearings as well as tub seals. In addition, keep in mind that replacing and fixing its tub seal and bearing kit is a complicated process as it involves disassembling the washer’s components. Having said that, it is suggested that you hire a professional technician to resolve the issue.
4. Inlet Hose
The inlet hose in the washer is designed to streamline the water inflow, but you need to remember that it has to be tight to deliver the best performance. To illustrate, you need to consult the manual to look for the inlet hose, locate it, and make sure that it is tight. On the other hand, if the inlet hose is loose, you only need to tighten it up. Once the inlet hose is properly tightened, just start the washing cycle, and we are sure you won’t have the leaking problem anymore.
5. The Leveling Legs
When it comes down to the washers, the extreme vibration during the washing cycle can offset the leveling legs of the washer. To illustrate, when the leveling legs are not adjusted properly, the water will start leaking from the seal or the bottom. For this purpose, you must switch off the washer and make sure that the washer is on the same level as the floor to resolve the issue. You might have to use a wrench for adjusting the leveling legs’ height. Also, make sure that the leveling legs are properly connected to the washer.
On a concluding note, remember that you call for professional help if you don’t have technical experience.