Even though there are plenty of brands that ensure clients with a durable and effective setup, you won’t be able to sustain their performance if you ignore their maintenance. So, instead of focusing on the features, you need to put adequate attention towards finding a unit that is easy to service. That way, you’ll be able to enjoy its performance over the long run without having to worry about any issues with the different components.
With that said, quite a few users have asked why does their stovetop work but not their oven. If you’re dealing with a similar situation and don’t know why you’re running into this issue with the oven, then the following reasons will improve your perspective on the issue.
Why Does My Stove Top Work But Not My Oven?
- Burnt Fuse
One of the most common reasons why you might be struggling with this issue is a burnt fuse in your unit. Luckily, this issue can be fixed rather easily after replacing the thermal fuse. You’ll just have to set aside a minimal budget for the fuse replacement, and it is available in the majority of hardware stores. However, if you’re using a digital range, then you’ll have to reach out to the dealer to source a compatible replacement.
With that said, you can always use a multimeter to check for continuity. This will help you isolate the problem in the wiring cluster, and you won’t have to spend hours trying to inspect all the wiring attached to the oven. So, it is best to either rent out a multimeter or purchase it for your toolkit.
If the fuse is in perfect condition, then you might be dealing with a sensor issue. However, to be sure, it is always better to test out the unit after installing a new thermal fuse in your setup. Ideally, the issue will be fixed at this stage, and you won’t have to bother with any other solutions.
- Defective Sensor
Issues with the temperature sensor in your oven can also lead to similar malfunctions where your stove will be working, but you won’t get any performance from the oven. So, you’ll need to verify the integrity of the sensor by using an external battery source with the oven. If the sensor works perfectly with an external power source, then you’re dealing with wiring problems.
However, if the sensor doesn’t respond to an external power source, then you need to replace it immediately. There is a good chance that this sensor is stalling the operations of your oven, and you’ll be able to get ahead of the issue after replacing the sensor.
Once the sensor has been replaced, the oven will start working perfectly, and you won’t have to bother with the same issues again. In some older units, you might have a sensor bulb that often gets loose in the housing. So, there is a possibility that you’ll be able to get the oven working again after securing the sensor properly.
- Heating Element & Wiring
If the sensor works perfectly when you’re using an external power source, then there is a good chance that you’re dealing with wiring issues. In this situation, you just have to trace back the wiring attached to the sensor to isolate the issue. If you’re lucky, then you’ll just have to fix a loose connection or clean a corroded connection point to get the unit working again.
However, if you’re dealing with a situation with frayed wires, then you’ll have to replace the wires completely. That will fix the issue, and the oven will start working perfectly. On the other hand, if there are no issues with the wiring, then the heating element in your oven has gone bad. In this situation, all you can do is call an expert and have him replace the heating element.
All in all, these were a few reasons that you might be dealing with if your oven stops working even though you’re getting performance from the stove. The best thing you can do is call customer support, as the reasons can vary depending upon the model you’re using. So, make sure to involve the experts, and you won’t have to deal with any excessive problems with the oven.