Reverse osmosis is the process to purify the water, and it is a whole system that processes the water from a semipermeable membrane. That way, water is being pushed with pressure through the membrane and you get to have all the contaminants removed properly from the water. Reverse osmosis can not only clear out carbons, and other contaminants form the water, but it is also highly efficient for you to get rid of chlorine, heavy metals, and more from the water, making the water safe for drinking.
The reverse osmosis process itself is pretty complicated, to be installed, and is considered not enough on its own to be appropriate for you to be having for drinking water out of some natural source, or stored water source. Yet, reverse osmosis is the best and most efficient way the purification the water that you are trying to use for consumption directly or for cooking. At times you might be seeing those bubbles in the reverse osmosis water. So, a few things that you will need to know about are:
Why Does My Reverse Osmosis Water Have Bubbles?
1. Air in the supply source
The first thing that you will need to know about, is what can be causing you to have this issue with the bubbles being shown in the water that you are getting after the reverse osmosis. These bubbles might seem like a problem for you to be having, but most of the time they are not. They can only be a result of you having a lot of air in the water supply source of the line that you are using to be purified through the reverse osmosis process.
The water supply has air in it, and it is often seen to be having a great impact on the taste as well. Oxygen mixing with water enhances the taste great for the water and is certainly healthier as well for the intake. So, the air in the supply source could be the reason for you to be seeing all those bubbles. There is not much that you have to worry about it, and these bubbles are more likely to settle down in a few seconds once you pour the water into a glass or some container.
2. Air trapped in the membrane housing
You will also need to know that the air can be trapped inside the membrane housing and you will have to be careful about that for sure. The membrane housing is made of rubber or some other such material, and while you are replacing the membrane or installing it for the first time for your reverse osmosis system.
The air being trapped in the membrane housing could be a reason for you to see the bubbles in our reverse osmosis water, but you need to rest assured that it is not a thing to be worried about either. The air trapped in the membrane will be coming out through the water, and after you pour that water in a glass, these bubbles will be gone. The best thing is that you don’t have to do much, and within a week or two, the air will be gone and you will not have to deal with these bubbles anymore.
3. Worn out membrane
Lastly, a common reason for you to be having bubbles in the reverse osmosis water has to do with the membrane. The membrane wears out with time and you will need to replace it time to time. That is why, if you are facing any such problems as having too many bubbles in the reverse osmosis water, that could be caused due to the contaminants being passed on to the water.
The water can have those contaminants due to the membrane being worn out, you will need to get it sorted out by replacing the membrane. Once you replace the membrane, you will have to ensure that you are draining out the air so that no air can be trapped inside to be assured that the problem has been fixed up properly. That way, you can get rid of the issue that has been causing you to have the bubbles in your reverse osmosis water lately.