Many people are slowly shifting towards the use of portable dishwashers because of their versatility. Users can easily take out this machine from the pantry, clean their dishes, and store it back when they are done. There is no need to permanently fix this dishwasher in your kitchen or alter the layout of your countertop. So, if you’re limited by the space in your kitchen, portable dishwashers are perfect for you.
Recently Whirlpool portable dishwashers have become quite popular among customers. However, you will often notice customers complaining about Whirlpool portable dishwasher not draining. If you’re in a similar situation, then the following solutions should help.
Whirlpool Portable Dishwasher Won’t Drain
1. Check Pump Motor
You should always start by inspecting the status of your pump motor to get ahead of this issue. Most of the time, the pump motor won’t reverse auction, and the water will remain in the unit. So, you need to check the pump motor to verify whether or not the drainage cycle starts after the wash timer ends. Ideally, you should hear a clicking noise when the motor starts to pump out water. However, if you’re not hearing anything from the pump motor after the wash timer has ended, then you need to install a motor replacement.
There have been a few cases where users were able to fix this issue by replacing the drainage solenoid. So, you can also try your luck with the solenoid and use a multimeter to check the integrity of the wiring cluster. That way, it will be easier to isolate the problem to other parts, and you won’t have to purchase a replacement motor.
2. Check Inlet Valve
Sometimes even if the drainage system is working perfectly, you can run into this problem with the water inlet valve. Depending upon the pressure and flow of the water from the source, it is possible that the water starts to seep into the unit after the wash timer has ended. So, if you suspect you’re in a similar situation, then you can fix this problem quite easily.
All you have to do is limit the water flow from the faucet or any other source after the washing cycle starts. Doing this will ensure that no additional water comes into the water inlet valve, and the dishwasher will drain out properly. Hopefully, this will help you overcome the drainage issue.
3. Fix Drainage Hose
In a Whirlpool portable dishwasher, it is quite common for users to run into drainage issues because of a kinked drainage hose. If you’re in a similar situation and the drainage hose is bent out of shape, then that is why you’re struggling with the drainage problems.
Luckily, the fix to this problem is quite easy, and all you have to do is fix the shape of the drainage hose, and it will start working perfectly. You won’t have to bother with any other solutions, and once the water is able to pass through the hose easily, it won’t collect at the bottom of your unit after the wash cycle.