Whirlpool glass top stove is not only aesthetically great to have in your kitchen that you love to look at. The looks you get from the whirlpool stove burner with a glass top are certainly great that allows you to have the best aesthetics for your kitchen and that will add the best feel and looks to your kitchen.
The looks are not the only plus about this burner but it is great with the utility features as well. With that being said, you get to enjoy the right edge of utility and performance on this stove as well.
Moving forward, the stove from whirlpool is pretty durable and you get to enjoy the right edge of practicality on it. That is why it would not cause you problems most of the time and you can keep using it easily. At times, the burner on your glass top stove might not work and there can be multiple reasons for that. A few reasons that might be causing you to have the problems and how you can solve them up are given below.
Some Handy Solutions For A Whirlpool Glass Top Stove Burner Not Working
1. Check the socket
If you are using an electric glass top stove from the whirlpool, you will need to check the socket, first of all, to ensure that there are no such problems on the socket that might be causing your burner to not work. At times the socket might be loose or not good that can cause you several problems including having a stove with a burner not working.
You should try out some other appliance on the same socket and see if it works. If it doesn’t, you will need to fix the socket first to ensure that there are no such problems with the electric supply. Moving forward, if the socket is working fine and you are still not able to make the burner on your whirlpool glass top stove work, you will need to check on some other components on the stove.
2. Connections
There are small connections in the burner sockets that are conductors for the current to pass through and if any of these have gone bad, you can face these problems with the burner not working. You will have to take off the burner from the burner socket and inspect all those connectors that might be the culprit and causing you to face such problems.
If you find any of these connectors burnt, or they might not be connected properly, you will need to get them replaced with the same size of connector to ensure the optimal supply of current and that will be helping you out to get rid of the problem for good.
A faulty connector might look burnt, or there can be melting signs around it that you will need to be particularly careful about. With that being said, a connector replacement can solve the problem for you most of the time. You might also need to replace the burner socket if it looks burnt to make sure that there are no such problems to be faced in the future as well and you can use the stove without any inconvenience.
3. Burner Surface Element
At times the burner surface element can also break down due to too much heat and that would need to be fixed as well. To access the surface element, you will need to take off the glass top so you can reach the surface element. You will need to remove the surface element bracket from the front and back and then you will be able to inspect the surface element on your stove.
If the surface element looks broken, you will need to take that off your stove and then get a replacement from Whirlpool. Be mindful to get the right surface element according to the model of your stove and not go for any after-market parts as that can be dangerous for you to run.
Once you get the surface element, you can install it on the stove, install the brackets to secure it and then reassemble the stove by putting it on the glass top as well. This will be helping you out to make the stove work again and no further problems will be faced either on your whirlpool glass top stove.