In case you are more comfortable using a gas range, we suspect that you like having better heating and complete control over the functionality. However, enjoying these features isn’t really convenient when you switch on the oven and see that the Whirlpool gas oven is clicking but not lighting. With this article, we are sharing the easiest solutions that will fix the lighting issue!
How to Fix Whirlpool Gas Oven Clicking But Not Lighting?
1. Defective Burner
In various cases, all your gas oven needs are cleaning, and it will resolve the issues with lighting and burning. That’s because the burners struggle with clogging due to spills, and these spills can harden up over the course of time. As a result, the small ports in the burner will be blocked, which means the flame won’t come up, and the burner won’t light up. To fix the issue, you need to clean the burner and make sure all the spills and clogging are cleaned. If you don’t know how to clean them up, follow the instructions mentioned below;
- Take off the ceramic discs from the burner
- Fill up the sink/basin with a soapy water mixture and place these discs in the water solution for half an hour (it will loosen up the hardened food particles)
- After this time, use a toothbrush for scrubbing off the hardened food particles and clear out the clogging. If the clogging is too stubborn, you can use baking soda as well, and it will help with loosening
- Then, just hold the disc under the running water and dry up with a piece of cloth. You can also air-dry the discs
- Once the discs are clean and there is no clogging, install them again, and check if burners light up
2. Moisture
When it comes down to the Whirlpool gas oven, it might not be lighting up because the burner has moisture in it. If you have recently washed the disc or some liquid spilled on the burner, there might be some moisture buildup that’s hindering the lighting. In particular, when the Whirlpool gas oven is clicking but it’s not lighting, you should check the burners. So, clean the discs and dry them properly to make sure there is no moisture left. We suggest that you use a hairdryer or a fan. Not to forget, you can also place the burner in the oven for around thirty minutes, and it will dry up the moisture perfectly.
3. Power Source
This is one of the simplest solutions, and it’s still overlooked whenever the Whirlpool gas oven fails to light up. Keep in mind that even with the gas range, the igniter needs a proper electricity connection for sparking the flame. So, if the igniter isn’t receiving the electricity, the igniter won’t create a spark. For this purpose, make sure that the gas oven is properly connected to the power source. If the electrical wire isn’t properly plugged in, you can simply connect it properly to retrieve the functions. Moreover, we suggest that you remove the extension cord because it hinders the proper power connection.