The dishwashers are a literal blessing for people who are always busy or just don’t like cleaning dishes. These kitchen appliances are designed to draw in water and soap from the respective compartments and clean the dishes. However, when Whirlpool dishwasher soap not dissolving issue happens, the dishes won’t be cleaned, and what could be worse than that, right? With this article, we are sharing the potential solutions to help you out!
Whirlpool Dishwasher Soap is Not Dissolving
1. Water Temperature
When it comes down to the water temperature, keep in mind that it should be higher than 110-degrees Fahrenheit to clean the dishes and dissolve the soap. That’s because if the water temperature is less than this, the soap won’t dissolve properly. The majority of Whirlpool dishwashers are designed with a built-in thermostat that shows the water temperature. However, if there is no thermostat, just use a thermometer to check the water temperature. So, if the water temperature is cooler, run the dishwasher only when the water is hot enough.
2. Insufficient Water
In case you have already checked the water temperature and it’s hot enough, the insufficient water level could be the second reason behind soap not dissolving. This is because a specific water level is essential to dissolve the soap. So, we suggest that you start the Whirlpool dishwasher, open it carefully, and check if there is enough water flowing within the unit. In case the water levels are low, you have found the culprit. Generally, this water level issue occurs when the pump is unable to get enough water, so increase the water supply from the backend. On the other hand, if the water supply isn’t an issue, clean up the filter and water circulation will be reliable.
The third reason why soap might not be dissolving is the damaged inlet valve. In this case, we suggest that you hit the start button and open the dishwasher’s door slowly and carefully. If you can see water, the valve is working fine, but if there is no water, it needs replacement.
3. Jammed Dispenser Door
When the dispenser door of the Whirlpool dishwasher is jammed or has blocked, it won’t be able to open up properly. The primary function of the door is to open the soap compartment and let it drop soap into the water. On the other hand, if the soap dispenser door is not opening at the right time, the soap won’t be mixed with hot water, and dishes won’t be cleaned. That being said, we suggest that you check the soap dispenser door and make sure it’s not jammed. If it’s jammed, call a technician to loosen it up. Secondly, the dispenser door might not be opening because the dish rack isn’t stacked up properly. So, make sure everything is properly stacked within the unit.
4. Spray Arm
The spray arm is responsible for distributing water within the Whirlpool dishwasher, and when soap is dropped in hot water, the spray arm will create a soapy mixture for cleaning and washing the dishes. That being said, if the spray arm isn’t operating properly, the soap won’t dissolve. So, just clear the clogging from the spray arm or replace the bush.