Thermador ovens are integrated with smart features and a top-notch build. One of the most amazing additions is the LCD display. The LCD display can be used to set the cooking temperature and time – it also helps select the cooking mode. In simpler words, the display helps control the oven’s functions. This means that if the display stops working, you won’t be able to select the time, temperature, or cooking mode. So, let’s see what can be done if the display stops working!
Thermador Oven Display Not Working
- Wires & Power Outlet
First of all, you have to check the wires to ensure the oven is getting sufficient power to operate. However, if the wires are disconnected, the oven won’t receive any power, which limits its functionality, and the display not working is one such issue. In most cases, the users forget to plug in the power cable, so check it and make sure it’s tightly connected to the wall outlet. While you are checking the connections, make sure that the wires aren’t damaged.
The damaged wires have to be replaced, and in you have recently changed your oven’s location, there are chances that the power outlet is damaged and needs to be repaired.
- Broken Display
If there is nothing wrong with the wires or power outlet but the display is still not working, it’s likely that the display is broken. In most cases, the display gets damaged if there is a voltage surge in the power connection. Honestly, there is no way to repair the oven display as there are small components that are impossible to check and repair. For this reason, get the electrician to check the continuity of the display, and if it’s zero, you have to get it replaced. The replacement display can be purchased from the Thermador store or website.
- Control Board
A damaged or defective control board is another reason why your oven display won’t work or turn on. This is because the control board is responsible for sending signals to the oven’s internal components. For this reason, when the control board stops operating, the display won’t get any signals and won’t turn on. If you don’t have electrical experience, it will be hard to inspect the control board, so it’s best that you hire an electrician and ask him to check and repair the control board.
- The Functionality Mode
It’s needless to say that Thermador ovens have great functions, and the energy-saving mode is one of the best ones. When the energy-saving mode is enabled, the display won’t turn on, and you have to reboot the oven to make sure it starts working again. Usually, the power-saving mode is automatically enabled when the oven has been turned on for over five hours. If that’s the case, you have to disconnect the oven from the power source for five minutes and reconnect it to start using the oven normally.
These four solutions should help you fix the display issue. However, if the oven is in warranty, it’s recommended that you call Thermador technical support to get free repair or troubleshooting assistance.