Just like every other appliance, your Oxo Coffee Maker also requires little care and cleaning after a certain period of consistent use.
However, if you do not properly maintain your appliance and do not clean it consistently, the appliance has a built-in failsafe that will automatically show you a red light.
Eventually, the appliance will stop working altogether. It is designed to prevent any hardware problems and is designed to work seamlessly.
If you do not maintain it properly, it may show a red blinking light, or you may notice a beeping sound which indicates an underlying problem that needs to be addressed before you can use it.
Most people get surprised when a perfect appliance starts showing a red light for no apparent reason. However, if you see this error, it might be a wise idea to read into what’s causing the issue and then resolve that.
Let’s find out what this red light you’re seeing on your coffee maker means.
Oxo Coffee Maker Red Light On
This light appears on your Oxo coffee maker right below, where your coffee maker shows the time. It shows up just above the Oxo button, and it’s straightforward to figure out. The red light has the classic warning icon silhouette, and it flashes until the problem is not resolved.
Why Does the Red Light Appear?
If your Oxo coffee maker is flashing the red light with the caution icon, but it is still brewing coffee without jamming or stopping, then it’s showing you a warning that your coffee maker needs to be cleaned or needs to be decalcified or descaled.
This is incredibly common if you have been using hard water with your coffee maker. Hard water is a serious problem and could lead to calcium deposits on your coffee maker, which gives the error.
If your house suffers from a hard water problem, you should know that this could lead to serious problems that are far beyond a coffee maker malfunction. Instead, your entire plumbing system could suffer due to the excessive hard water problem.
The calcium in the tap water makes a layer inside your coffee maker resulting in a bad coffee taste or just flat-out jams your filter. It is better if you prefer bottled or filtered water than tap water because it contains less calcium content.
Hard water should be the least preferred water for making coffee with an Oxo coffee maker. If you want to resolve the hard water problem, one of the best things that you can do is to install a hard water filter in your house.
A filter will reduce the mineral content in the water and make it easy for you to ensure that your appliance continues to run smoothly. However, if your coffee maker is showing a warning icon with a red light, it requires descaling with the help of a decent descaling solution.
7 Easy Steps To Descale Oxo Coffee Maker
1. Limescale is a natural mineral deposit that builds up in your coffee maker, and to descale it, you will have to use a descaling solution.
2. Before you start descaling your coffee maker, you must make sure that you have unplugged your coffee maker. Don’t just turn off the 3. power; unplug it. You never know when residual electricity might cause a serious problem. So it’s best to be as safe as possible.
Now you must fill the reservoir of your coffee maker with a decent descaling solution along with water. The liquid must be filled up to the max fill line.
4. Make sure that the carafe of your coffee maker is in its right place.
5. Also, it would be best if you did not overfill the reservoir because it can result in the overflowing of water over the carafe.
6. Once you have filled the reservoir, now you can plug in your coffee maker back and hold down the Oxobutton of your coffee maker. Again, a -9- symbol will be displayed, and the LED ring may turn red after it.
7. Now to begin the descaling cycle, you must press the Oxo button again. The descaling solution will dissolve all of the minerals that have caused a build-up on the pipes and will ensure that the machine’s interior is as good as new.
Once you are done descaling, you must fill your oxo coffee maker reservoir up to the fill line with water. Then, discard water without the ground coffee beans by running a cycle of 5-9 cups of water before the next use.
And for the next time, make sure that you regularly descale your Oxo coffee maker so that it does not get clogged up or show you this problem again. The Oxo coffee maker, just like any other coffee maker, is not designed for use with hard water.
If you use it with hard water, you are essentially putting a greater burden on the appliance itself. Furthermore, with time, it is going to cause problems. Now, what happens if you try all of the tips given in this article, and it still doesn’t work?
If that happens, the best thing that you can do is to take the appliance for repairs. Avoid meddling with the circuitry or the wiring in your Oxo coffee maker on your own.
In some cases, even a tiny problem could cause a malfunction on the red light, so it’s best if you take it to a professional to get it fixed.
Avoid tinkering with the appliance on your own unless you want to risk damaging the appliance permanently. It’s a wise idea to let a professional deal with the appliance if the basic fixes do not work.
If your Oxo coffee maker is covered under warranty, you can always claim the warranty to get it repaired or replaced at no extra charge whatsoever.