A blender in the kitchen saves up time and energy. Nutria Ninja Auto iQ is a new type of blender that makes shakes, purees, or in general any type of liquifying item with relative ease. The innovative Auto iQ technology has powerful blades to extract juice with a high amount of vitamins and nutrients. The in-built programs pulse, blend and pause as required.
The customer’s most asked question is that nutria ninja auto iQ won’t turn on. Sometimes, a lot of users face a certain problem with an appliance. So, let’s see how you can fix it and make use of its great blending capacity.
Nutri Ninja Auto IQ Won’t Turn On
Your blender not turning on is not the end of the world. All you need to do is some troubleshooting.
1) Assemble The Parts
The first step after receiving your blender is to correctly assemble the different parts of the blender. If you used the blender early on and it was working fine, then this simple may be the solution to your problem. Sometimes, not putting the pieces in the right order makes the machine stop working.
You can check out the instructions manual or watch a video.
You should assemble the blender and prep bowl correctly. The blade assembly must be in the right position when moving it through the gasket. Handle the blade part carefully as the Ninja blades are pretty sharp.
Fit the pitcher tightly at the blender base. The pitcher fits comfortably on the four positions. In case, you have a hard time rotating it, then work with the handle. The handle of the blender should be on the front left or front right corner of the base. This ensures that the blender is assembled in the right way.
After that, you have to move it in a clockwise direction. You will hear a click that shows the blender is fixed and in place now.
Then, push the handle downwards and you will hear a click. Here, your assembly part is finished.
2) Thermal Switch
Has your blender been working non-stop? It can likely cause the blender to stop turning on. Whenever you excessively use an appliance, it overheats. This can also happen if you blend something that strains the motor. You may not notice that your blender is overworking but it does. The motor is the part that becomes hot.
So, when your blender heats beyond its limit, the thermal switch comes into play. The switch flips and the blender will stop working. It is like a circuit breaker that trips with excessive electricity load.
The solution to this is patience. Unplug the blender and wait for 15-20 minutes. Give the unit enough time before you turn it on again.
Conclusion
Ninja Nutri Auto iQ may stop turning on all of a sudden. However, you need to find out the problem. Follow the troubleshooting tips mentioned above first. In case, none of these solutions work for you, call customer support. It is always advisable to take an expert’s advice when simple fixes do not work.