Most of the old appliances take too long to start functioning. Some espresso machines take around 20 minutes to produce the steam. However, the newer ones get your tasks done in a short period because no one wants to spend half an hour making a cup of coffee.
Mr Coffee Espresso Maker Steam Not Working
If you are using Mr coffee’s espresso maker then it can get your task done in a short time. However, if you are facing any trouble with the coffee maker not steaming properly, then you need to fix it.
To help you out, we have listed a few ways to troubleshoot the problems along with their solutions.
1. Boiler Got Bad
The boiler is the main component that generates steam in your espresso maker.
- First of all, you must check if there is any heat evolving from the boiler?
- If there is no heat coming out of the boiler then your boiler has gone bad.
- Get your boiler replaced or contact customer service for resolving the issue.
2. Steam Wand Clogged
The steam wand also has a major contribution in making you a wonderful cup of cappuccino. The steam wand will direct steam to your mug however, if it gets blocked then your coffee won’t have that perfect taste. There are a few steps through which you can check your steam wand.
- There is a resettable thermostat present on the steam boiler. You must check this thermostat by pressing it.
- Pressing the reset button will determine if it’s tripped.
- You can clean this part of your espresso maker with the help of a needle. A needle can be perfect to remove the clog that is present inside.
- You can also clean it up by putting your steam wand in a bowl of white vinegar.
However, it is better to maintain your steam wand clean for a long time. You better switch your Mr. Coffee Espresso Maker to the steam position so that it remains clean and removes any residual milk if there’s any left.
3. Broken Heating Element
The heating element present inside your Mr coffee espresso maker is responsible for keeping both water and your espresso warm inside the machine. If you use hard water regularly then your heating element will get calcified, ending up being blocked.
The best way is to maintain your espresso maker by decalcifying it regularly with the help of steps given in the manual. However, you can check your heating element with these easy steps.
- First of all, you must remove all the screws to find your heating element in the appliance.
- Now you must use a multimeter to check the continuity of your heating element
- You can check the continuity by placing the multimeter on both ends of the heating element.
- If the meter shows a single direction then it’s fine however if it’s moving in both directions then your heating element has a problem.
Before checking your heating element you must make sure that you have unplugged your Mr. Coffee Espresso Maker from the power supply.
We hope this article helps you resolve your problem related to the espresso maker not steaming properly.