When the dishwasher stops working, there is never one reason as it depends on a variety of factors. For instance, when the Maytag dishwasher won’t start, but lights are flashing, you need to look for troubleshooting methods. In the article below, we are sharing the troubleshooting methods and how the problem can be resolved!
How to Fix Maytag Dishwasher Won’t Start But Lights Flashing?
1. Insufficient Power Supply
Before you consider it a technical malfunction, you need to start with the power supply and overall power supply assessment. In simpler words, if the dishwasher isn’t getting a sufficient power supply, it will not power on. There are different things that you’ve to check when it comes down to power issues, such as;
- Make sure that you aren’t using the extension cord to operate the dishwasher. This is because the extension cord isn’t good at safe voltage conduction. For this reason, you should use the standard cord that comes with the dishwasher. Also, make sure it’s plugged in the active electricity outlet
- Secondly, check the power switch and make sure it is switched on. There are chances that you switched it off by mistake, so there is nothing wrong with rechecking the power switch
- The third reason could be the tripped breaker or a bad fuse. You’ve to check the fuse box of your home to replace the fuse. If the breaker has tripped, you have to only reset it
If none of these steps works for you, you can simply reset the dishwasher. For this purpose, plug off the dishwasher by removing the cord for two minutes. After two minutes, plug in the dishwasher’s power cord again and see if it resolves the issue.
2. Door
The dishwashers are meant to be properly closed in order to work. It is designed this way as a safety precaution. So, if the door is not properly latched and closed, the lower rack will prevent the door closure, and the dishwasher won’t switch on. For this reason, you have to ensure that racks are inserted properly and is retracting properly. When the racks are properly placed, the door will properly close down and be latched. As a result, the dishwasher will work fine.
3. Cycle Settings
The majority of Maytag dishwashers are designed to operate only if you select the wash cycle. For this reason, if the dishwasher is not starting, there are chances that you haven’t selected the correct cycle or function. To illustrate, you can press the start or resume button on the dishwasher’s control panel. On the other hand, if you have switched on the control lock by mistake, it could be why the dishwasher is not operational.
In addition, if you haven’t used the dishwasher for a long time or have just installed the dishwasher, there are chances that the dishwasher is set in sleep mode. In that case, the dishwasher won’t start unless you hit the start button on the dishwasher.
To conclude, these are some ways of resolving the issues with the startup of the dishwasher. For this reason, you can call the electrician. However, you can also get in touch with Maytag customer support!