Maytag dishwashers are famous among everyone who needs an easy dishwashing experience. This is because these dishwashers are designed with advanced features to offer in-depth cleaning of the utensils.
Similarly, there is a fair share of users who complain about the Maytag dishwasher not draining and it can be challenging to wash those dishes after hectic work schedules. With this article, we are sharing the troubleshooting methods that can help get the dishwasher back on track!
Maytag Dishwasher Not Draining
1) Clogged Filters
If you are fortunate enough, there are chances that the dishwasher will start working as soon as you clean up the filter and remove the clogging. The filter is responsible for screening the bigger food particles for preventing the chances of a clogged drain.
But again, over the course of time, these particles still have the capacity to block your dishwasher’s filter. Keep in mind that your dishwasher might not have air gaps, so if some debris is flushed to the sink’s drain, it has the capacity to clog the filter.
For future reference, we want to tell you that this filter must be cleaned after every two to three months to optimize its performance. In addition, regular replacement of the filter will prevent the chances of clogging. Moreover, if your dishwasher always has standing water after the end of the cycle, it needs immediate cleaning.
The filters can be cleaned by running them under the water. You should also use a toothbrush to scrub away the debris and rinse it thoroughly. Then, add it to the place, and don’t forget to clean the filter cage as well.
2) Obstructions In Hose
Whenever the Maytag dishwasher starts showing a draining issue, you should think about the hose because it can be a prime reason. For instance, if a large food particular or something else solid passes through the filter, it will clog the hose and the drainage will be impacted.
For the most part, dropping in the mixture of hot water, baking soda, and vinegar should clear up the obstructions. On the contrary, if the mixture doesn’t work, you have no choice but to disconnect the hose for removing the obstructions.
We do suggest that you hire a professional technician service to remove the hose and clear up the obstructions. This is because for disconnecting the hose, the interior and plates have to be unscrewed for clearing up everything.
If you decide to do it on your own, always switch it off from the power source and cut off the water supply. When the kinks are cleared, screw up everything in place and switch on the water supply.
3) The Drain Pump
When it comes down to the Maytag dishwasher, the drain pump is designed to use the impeller for flushing debris and water into the hose (the impeller is powered by a motor). When the draining doesn’t complete after the cleaning cycle ends, the motor might be defective or has failed.
Whenever this issue occurs, clogging can occur by accumulating the debris. The optimal solution is to check the continuity and you can take the help of a multimeter for this purpose. When there is no continuity, the only solution is to replace the pump because repairing isn’t a long-term solution.
4) Impeller
Maytag dishwasher is integrated with a drain impeller and is responsible for pushing water through the hose and into the disposer (yup, we are talking about garbage disposer). When the impeller stops working according to the set standards, the drainage won’t pass down. The best solution is to replace the impeller and hire a technician for installing a new part.
5) Solenoid Kit
The savvy people would know that the solenoid kit is responsible for opening up the drain valve for allowing the water to exit from the dishwasher. When the solenoid kit is failing the valve, it won’t open up that will cause drainage issues for a dishwasher.
So, the solution is pretty obvious that you must call the dishwasher repair services and ask them to fix the solenoid kit. The better option is to replace this kit because it’s a more viable option.
6) Valves
Before we get into the details, we are talking about the drain valves. Over the course of time, this valve can be clogged with debris and it will even restrict the water flow. You will have to remove the dishes and reach the valve. Then, clean everything out of the valve and try again.
However, if the water still won’t pass through, the ultimate option is to replace the valve. Keep in mind that if the valve is broken, you must replace it because applying tape or just repairing it isn’t enough.
7) The Garbage Disposer
For people who started experiencing the draining issue after installing a new garbage disposer as a replacement, it might be the issue. This is because you might not have removed the drain plug. If you are unaware, the disposers are sold along with a plug (the plug is in the drain tube).
When the garbage disposer and dishwasher aren’t connected, the plug should be out. So, do the said changes and the drainage will start working. Secondly, do remove the clogging if there is some because it can hinder drainage as well.
8) Ball
To begin with, we are talking about the check ball that’s available in the dishwasher’s check valve and is the plastic ball. It is responsible for preventing the water return to the unit when it’s drained away. When the check ball is stuck, it won’t let water flow through the dishwasher’s check valve, hence the drainage issue. For this reason, you should move the check ball and make sure it’s free.
9) Check Valve
We have already mentioned the prime function of check the valve (yup, it prevents water from returning to the unit). When this check valve gets stuck or is closed down, water won’t drain and you should clean it out. If you see some visible cracks, try to replace the valve for better performance and drainage.
To summarize, these solutions will resolve the drainage issue. In any case that your dishwasher needs a repair or spare part replacement, you should call the official technical support of the Maytag dishwasher to fix the issues because they are trained to handle these specific dishwashers.