7 Ways To Solve Kenmore Elite Dishwasher Model 665 Not Draining

kenmore elite dishwasher model 665 not draining
  • Save
kenmore elite dishwasher model 665 not draining

No one likes to wake up to a dishwasher with a water puddle at the bottom. It happens when the dishwasher is not draining out water after cleaning. In the majority of cases, this issue is caused by minor reasons that you can fix at home. So, if your Kenmore Elite dishwasher model 665 is not draining, we have the solutions listed for you!

How to Solve Kenmore Elite Dishwasher Model 665 Not Draining?

1. Drain Impellers

The drain impeller in a dishwasher is responsible for pushing water through the drain hose. Then, the water is pushed to the garbage disposer. On the other hand, if the drain impeller is broken, the water won’t pass to the disposer and result in water puddles at the bottom.

2. Drain Pump

The drain pump is basically a combination of drain impeller and drain hose (yes, exactly how the water is pushed to the garbage disposer). When the drain pump stops working, the water won’t drain out. For this reason, you have to utilize your multi-meter as it helps check the continuity. If there is no continuity, the drain pump won’t work and won’t have the power to operate. To fix this issue, replace the drain pump and get it done by a professional.

3. Solenoid Kit

In particular, we are talking about the drain solenoid kit. It is responsible for opening the drain valve to allow water exiting from the dishwasher. When the solenoid kit fails to operate, the valve won’t open, and water won’t rush out of the dishwasher. If the solenoid kit is at fault, it must be replaced immediately to get the dishwasher back to normal operations.

4. Drain Valve

If you use your dishwasher regularly, there are higher chances that the drain valve is clogged. This is because it can get clogged with dust and debris. So, to ensure proper water flow through the dishwasher’s drain valve, clean it up. When the drain valve is clear from debris, the water will go out and ensure seamless draining.

5. Motor & Pump Assembly

The motor assembly is designed to operate an impeller to drain water out through the drain hose. If the motor is running the drain cycle, you have to check the drain line for blockage. On the contrary, if the motor is unable to run the drain cycle, the assembly is worn out and needs to be replaced to resume draining.

6. Garbage Disposer

If you have recently installed the garbage disposer and it has stopped draining, there are chances that the drain plug isn’t properly removed. The disposers are designed with plug, and it needs to be removed to get the water draining out. Also, don’t forget to clean the garbage disposer regularly because clogging is normal.

7. The Check Ball

If you aren’t aware, the check ball is designed into the check valve that prevents the water from returning to the dishwasher when it has drained the water once. In case the check ball is stuck, the water won’t be drained out. So, the solution is to free up the check ball. However, if you are unable to free it on your own, call a dishwasher technician.

  • Save

Leave a Comment

Share via
Copy link
Powered by Social Snap