Kenmore Coldspot 106 Not Cooling: 3 Ways To Fix

kenmore coldspot 106 not cooling
  • Save
kenmore coldspot 106 not cooling

There are tons of utensils and equipment available for people to purchase. While most of these might not be useful to you. Having a refrigerator in your home can be almost essential. This is because of how important the features in it are. These allow you to store edibles and ingredients for food without them going bad. You can even cool your drinks or make ice cubes in the device.

Although, when it comes to purchasing a refrigerator, there are tons of companies that you can choose from. One of the best ones around is Kenmore. The Coldspot 106 is one of the best lineups that the company has come up with. While this is amazing to use, some users have complained that their Kenmore Coldspot 106 is not cooling. If you are getting the same issue on your device, then going through these troubleshooting steps should help you out.

Kenmore Coldspot 106 Not Cooling

  1. Check Temperature Settings

Refrigerators are used to cool down stuff that has been placed in the device. Although, if the cooling on them is not working then these become useless. Although, some things can cause this issue which is why you must look into them. You should be able to pin down the problem using these steps which makes it easier for the user to fix them.

The Kenmore Coldspot 106 has a dial on it like most refrigerators. This is used to adjust the temperature within your device allowing you to increase or decrease it. Sometimes when putting stuff in your fridge, the user can accidentally hit the dial changing the temperature.

If you had accidentally increased it then that might be why your device is no longer cooling. Simply turning down the temperature should allow it to start cooling again. You can also change the fan speeds from the control panel which should be set to high if you are getting no cooling. Adjusting the settings correctly should allow you the fix the problem you were getting.

  1. Low Voltage

Another common reason why your fridge might not be cooling can be that it is getting low voltage. This can be an issue from the backend or with your outlets instead. Check all the other outlets and devices in your house to confirm if those are working fine. If all of the outlets are running into issues then the problem is from your main power board.

Although, if all the rest of your outlets are working fine then use a voltmeter to test the readings on your current socket. If the values are fluctuating then the current outlet has become defective. You will have to replace it with a new one to fix the problem. It is quite easy to purchase these as sockets are available at most electrical stores. You can then replace it by installing the wires in the same spot they were before.

You should keep in mind that this is only recommended for people who already know how to replace a socket. If you are unfamiliar with how these work then it is better that you contact a technician. This is because it might be easy to change these boards, but it can be quite dangerous to do this on your own. Finally, once the wires have been installed in your new socket, remember to put tape on them. This will prevent the wires from surging current in case of fluctuations.

  1. Check Coolant Levels

Finally, another reason why your Kenmore Coldspot 106 can stop cooling is because of the device overheating. There are two main things that you can check for this. First of these is the place you have installed your fridge in. If there is no airflow near the device then that might be why it is overheating. You should either place it near a window where air can hit the fridge keeping it cool.

On the other hand, you can install a fan nearby the device and keep it running to prevent your fridge from overheating. Although, most users might have already done this. The second thing that you have to check is the coolant levels in your device. These eventually dry out and have to be replaced. In some cases, there can even be leakages in your coolant tanks. This causes the coolant in them to leak out the floor. Although, if this happens then you should be able to smell ammonia near the device.

  • Save
Share via
Copy link
Powered by Social Snap