The dishwashers have become an important part of every household because no one has to do dirty dishes anymore. These dishwashers just grab some dishwashing detergent on their own and clean up the dishes.
However, when we about detergents, people have started using pods to reduce excessive use of the detergent. These dishwasher pods are designed to dissolve into the unit and provide lathering to clean the dishes. However, dishwasher pods not dissolving has become another issue but it’s fixable. So, are you ready to get the pods dissolving?
How Does The Dishwasher Pod Work?
Before we tell you the solutions, it is important to understand how these pods and dishwashers work because they will help fix the issue properly. For the most part, the dishwasher works the same as your hands while washing the dishes, but it’s only automatic.
This means that the dishwasher will keep working when the wash cycle is set and it even dries up the dishes if you have the dryer feature. The dishwashers are designed to use water jets with extremely high pressure for scrubbing the dishes.
In addition, there is an arm inside that moves around in the rack where dishes are placed to ensure every dish is thoroughly cleaned. The optimal water temperature needs to be around 120-degrees Fahrenheit to 160-degrees Fahrenheit (it’s warm) to ensure the pods or soap is dissolved properly (it is important for efficient dishwashing). Secondly, the dispenser door is responsible for opening up and dropping the pod into the warm water for washing the dishes (the pod is to dissolve).
As a result, soapy water will be created which is pumped by rotating arms for cleaning up the stuff. Lastly, when the wash cycle is complete, the dishwasher will drain out the water and the dishes will be clean. Now, when the dishwasher pod is not dissolving, there has to be an issue with the above-mentioned parts. So, let’s get to fixing now!
How to Fix Dishwasher Pods Not Dissolving?
1. Temperature
To begin with, this is about water temperature. According to the experts, the water temperature should be more than 110-degrees Fahrenheit and 115-degrees Fahrenheit to ensure proper pod dissolving. If the water temperature is less than the mentioned scale, it won’t be able to dissolve the dishwasher pods. The majority of dishwashers are designed with an in-built thermostat for showing the water temperature. However, if there is no thermostat in your dishwasher, simply use a thermometer to determine the water temperature.
Also, the water is supplied from the sink, so you can easily check the temperature. At this point, the only solution is to give a hotter water supply to the dishwasher. If you are not getting hot water in the supply, just wait for a bit and start the wash cycle when the water is hot enough. Lastly, always check the water temperature before starting the wash cycle to prevent frustration.
2. Insufficient Water
The dishwashers tend to use excessive water (it’s not sustainable but what can we do). Anyhow, the dishwasher pods won’t dissolve when the water supply is insufficient. For checking the water percentage, you have to start the dishwasher and open the door carefully. Now, peek inside and see if there is enough hot water running and flowing in the unit. The easiest way is to check the water level at the bottom of the dishwasher.
If the water level is low, you know what’s hindering the pods from dissolving. This issue is generally caused by the pump’s inability to pump enough water into the dishwasher. That being said, you should call the technician and ask him to repair the pump. However, before you do that, there is a filter inside the dishwasher (it is located at the bottom of the unit). So, if the filter is clogged, clean it up, and see if the pump starts pushing out enough water. If it does, you just saved yourself a hundred bucks from the repair!
In addition to the pump, the dishwasher might not be getting sufficient water supply because the inlet valve has gone bad. If the issue is caused by the inlet valve, there won’t be any water flowing into the dishwasher. Also, the only solution is to replace the inlet valve.
3. Dispenser Door
The dispenser door in the dishwasher is responsible for dropping the pod into the dishwasher. However, when the dispenser door gets jammed, the pod won’t be dropped into the hot water and there won’t be any dissolving (of course). The prime reason behind a jammed door is the incorrect or ineffective stacking of the dish rack. This is because some dishes might be hindering the free movement of the dispenser door, hence the issue. Fortunately, the solution is as simple as changing the stacking position of the dishes and the door will start opening fine. As a result, the pods will be dropped and dissolved on time.
4. Spray Arm
The spray arms in the dishwasher are designed to spray water from the holes. The holes are pretty small and can clog up. As a result, water won’t be sprayed into the dishwasher and the dishwasher pod won’t dissolve. If clogging is the issue, you can simply use a water pipe to wash the holes and it will push away the clogging. However, if clogging isn’t the issue and there are visible damages to the spray arm or if it’s broken, you have to get it replaced by a technician.
5. Circulation Pump
As the name suggests, a circulation pump is responsible for supplying and circulating water in the dishwasher (it’s an extremely important component). It also helps with water spraying and opening up the dispenser door. Now, if you hear some abnormal sounds after the wash cycle, you need to open the unit’s door and look for splashing. If it is not splashing, you have to call a repair technician and get the circulation pump repaired. As a result, the water circulation will be optimized and dishwasher pods will start dissolving.
These are the only solutions to the pod dissolving issues. To summarize, we would like to tell you that if you’ve to get something repaired or replaced, check if the dishwasher is on warranty because it can really cut down the costs for you!