The Breville Toaster is a popular kitchen appliance that combines the function of a toaster and an oven. It is easy to use and can cook various foods, from toasted bread to roasted vegetables. Understanding the Convection fan’s function is important before learning how to fix it.
This fan is responsible for circulating hot air throughout the oven, allowing for even cooking. Without it, the food may not be cooked evenly and could lead to under or overcooking. Recently some users have reported issues with the convection fan not working properly.
If you’re struggling with something similar, you’ve found the right article. But before you begin troubleshooting this issue, it’s necessary to understand that safety comes first and if you’re equipped with limited knowledge or resources, please consult a professional for assistance.
Breville Toaster Oven Convection Fan Not Working
- Identify the Issue
We will begin with identifying the issue because it’s necessary first to figure out why the oven convection fan has stopped working. Begin with figuring out if the fan is not working at all or if it is simply not blowing hot air.
An easy way to test this is by placing your hand near the fan while it’s on. If there is no sensation of air movement, then it may be that the fan motor has ceased functioning.
If you feel air movement, but it is not hot, there could be a problem with the heating elements or temperature control.
If this is not the issue you’re facing, check if the fan is physically blocked or obstructed by food debris. Another reason for a faulty convention fan could be a power issue, such as a blown fuse or tripped circuit breaker.
- Check the Heating Element
If you suspect the lack of hot air circulation is due to a faulty heating element, it’s important to check if it is functioning properly. Begin by taking off the back panel of your Breville Toaster Oven and locating the heating element. It will usually be a long coil-like wire.
Using an ohmmeter or multimeter, test the resistance of the heating element by touching each end of the wire with the meter’s probes. If the reading is infinite or close to it, replace the heating element as it is not functioning properly.
- Check The Motor
If the fan is still not spinning, it is time to check the fan motor. At times, the convection fan motor may not be functioning properly.
To check if this is the issue, remove the back panel of your toaster oven and locate the fan motor. Using a multimeter, test for continuity by touching each end of the motor with the meter’s probes. If there is no continuity or low reading, it would be necessary to replace the fan motor.
If so, use one compatible with your specific model and follow all installation instructions carefully. One important note is to ensure proper insulation and precautions to prevent an electric shock.
- Check The Power Source
If the steps mentioned above didn’t help resolve your issue, it is recommended to check for power issues such as a blown fuse or tripped circuit breaker. Remove the back panel and locate the fuse; it will usually be a small cylinder-shaped component near the power cord.
If it appears burnt or damaged, replace it with one that matches the specifications for your model of Breville Toaster Start by unplugging the toaster oven and checking if the fuse needs replacement.
If it does, consider replacing it. If the problem persists, reset the circuit breaker or consult a professional for assistance.
- Check The Fan
The most common reason for a faulty convection fan is physical obstruction or blockage. It’s important to check if any food debris obstructs the fan blades or if they are damaged. If necessary, clean out any build-up with a clean cloth or brush.
- Fixing a Non-Functioning Fan:
If the fan is not spinning, try unplugging the toaster oven and letting it sit for a few minutes. This simple step can often reset any technical glitches.
If this doesn’t work, check if the convection fan blades have become stuck or obstructed by food debris. Use a brush or soft cloth to remove any blockage before plugging in and testing again.
- Fixing a Non-Heating Fan:
If the problem isn’t with the fan, there could be an issue with the heating elements or temperature control. First, check that the temperature setting is correct and not set lower than desired.
If you have already selected the right settings, clean out the heating element, the common reason is either a build-up of food debris or a faulty element. Following the steps above, use an ohmmeter or multimeter to test for resistance and replace it if needed.
- Avoid Overusing Convection Mode
It’s important to note that using the convection mode frequently can increase wear and tear on the fan and heating elements, potentially leading to malfunctions.
Consider using traditional bake or roast settings as needed to prolong the life of your toaster oven. If you already use the convection setting, clean out any food debris regularly to prevent obstructions and reduce the risk of damage.
The Bottom Line
Overall, always refer to your manual for specific instructions and precautions related to the next Breville Toaster Oven. And when in doubt, consult a professional for assistance with repairs or maintenance.
Taking these steps can ensure that you continue to enjoy the convenience and versatility of your Breville Toaster Oven for years to come.