Coffee is the very first thought a coffee lover craves in the morning, and kudos to the Breville Coffee Machine, which elevates their coffee-making experience and nourishes them with a cup of coffee.
The Breville milk frother is made of stainless steel and comes in a variety of sizes. If you’ve used the Breville milk frother before, you’ll be familiar with all of its features. The detailed specifications of this milk frother set it apart from the rest of the frothers.
The Breville milk frother comes with a latte frothing disc and a cappuccino frothing disk to help you enjoy smooth milk. The cappuccino frothing disc produces a thick, creamy froth.
Another advantage of the Breville milk frother is that it can be cleaned in the dishwasher, saving you time. The Breville milk frother is extremely user-friendly and easy to operate.
But, like many other kitchen equipments, milk frothers, at some point, encounter a slew of internal and external problems. For example, it won’t turn on, it’s not producing enough steam, and so on.
As with other appliances, the first step is to identify the symptom, problem, and potential troubleshooting moves. There are a few common Breville milk frother issues and solutions to get your device back up and running.
Breville Milk Frother Problems
1. The frother is not turning on at all
The Breville milk frother works on the principle of induction heating. When an appliance operates using the induction heating mode, it requires a foolproof system on the inside.
Induction heating is the mechanism by which the appliance generates its electricity to operate the machine engine.
An interrupted electricity supply is required for the milk frother to work appropriately. At times, the thermostat or the capacitor inside can get burned.
In such instances, the frother doesn’t work at all. If you’re not well equipped to figure out the problem, seek professional help.
As ridiculous as it may sound, users occasionally forget to plug in the frother properly or are unaware of the settings. It is necessary to read the instruction manual to avoid such a problem.
Each frother comes with a manual that explains how it works. After thoroughly reading the handbook, you will have a better understanding of how to use the frother.
2. The frother is too slow
You may notice that your frother is no longer operating at the same speed. Frothers operate at high speeds and generate a lot of power to froth the milk.
If the frother is slowing down, you need to check two things. First, are you aware of the filling capacity? You can’t just add milk according to your demand.
Each frother comes with a limit, and if you add more than that, the frother will get overloaded. An overloaded frother will not produce good quality froth and may even slow down the frothing process.
Next, check if the frother is properly aligned. Make sure you’re correctly adjusting all the parts. The frother will not function optimally if the alignment is not correct.
Read the User Instruction Manual again to gain a better understanding of aligning the frother.
3. The frother is overheating
The frother works at high speed and tends to get slightly hot at times. However, if you’re noticing that the frother is overheating more than usual, time to give the frother a rest.
Sometimes, the frothing machine comes to normal temperature within minutes, while other times it takes about half an hour. Avoid continuously using the frothing machine, and make sure you give the frothing machine a break.
Don’t froth for more than 5-8 minutes at a time. If you require more frothing, take a break and start again after a few minutes. This way you won’t be overburdening the frothing machine.
4. Why is milk not getting frothed?
At times, you’ll notice that the milk you’re adding is not getting frothed properly. To avoid such a situation, try using lightweight milk and for better results, use warm milk instead of cold milk.
The problem isn’t always with the frother. More than usual, an improper technique can cause more hindrance. Make sure you have a good understanding of the frother before you start using it.
5. Time to clean the frother
When was the last time you dismantled the frother and gave it a good, thorough clean? If the answer is never, then it’s time to start cleaning. The frother can easily get clogged from leftover coffee and dirt residuals.
In case of clogging, the frother will no longer produce the desired results. To avoid such an issue, make sure you clean the frother every once in a while. At times, the issue gets resolved on its own by simply cleaning the frother.
6. No Fat, Results in No Forth
The milk you’re pouring might also be the cause of your Breville milk frother not foaming. This is true regardless of the milk brand you have.
Different brands of milk froth in different ways. The basic guideline is that the more fats you consume, the better result you get. Remember that the full-fat milk makes amazing foam. If you are using low-fat milk and even most plant-based milk, you will not receive the same quantity of froth as if you used full milk.
This is definitely bad news for vegetarians. Soy and oat milk froth the best among plant-based milk. Yet, baristas mix milk that produce excellent froth.
7. The Frother’s Disc is Incorrect and Must Be Realigned
If there would be any dirt, it may be cleansed. If somehow the clean frother refuses to stream and makes froth once again, then the disc is most likely misaligned.
The wisest choice would be to check the owner’s manual. There should be a part that details how to re-align everything. If you properly follow the procedures, you should be able to avoid such difficulties with your Breville milk Frother in the future.
Conclusion
The Breville Milk Frother is among the most reliable on the market, but it does occasionally malfunction. However, once the cause of the problem is recognized, most problems are simple and easy to resolve.