Bosch Dishwasher has the perfect utility edge for you since you will be able to make sure that you are getting the best edge of perfection without having to worry about a single thing and get your dishes not only washed properly but dried as well all ready to be hanged on the rack that you might be using. Bosch Dishwasher also has light indicators on it that allow you to know the status of your dishwasher and sometimes get warning about it as well. If you are getting no lights on the control panel, here are a few things to do.
Solutions for Bosch Dishwasher No Lights On Control Panel
1. Check the Functionality
First of all, you need to make sure that only the lights are off and the Bosch Dishwasher is working fine. It is pretty simple, and you just need to run the dishwasher once to ensure that you can make it work. Once you get that done, it will be pretty easy for you to diagnose and troubleshoot the problem. If the dishwasher is not working at all, that means it is not getting any power and you will need to check on the power chord and make sure that it is connected to a working wall socket.
However, if the Dishwasher is working fine, but is not showing any lights on the control panel, you can easily get that fixed as well and there is not much that you will have to worry about regarding this. A few things to try out if just the lights are not turning on would be:
2. Restart
The optimal way to get that sorted out is to ensure that you are restarting the Bosch Dishwasher optimally. It should be easy enough for you and all you will need to do is take off the power chord from your dishwasher for a couple of minutes and then connect it to power once again. That should do the job for you and you will not have to face any more problems afterward at all. After you turn it on, check for the lights and they should appear to be working fine.
3. Check Fuses
The next thing that you will need to do is make sure that there is no fuse on the Bosch Dishwasher that might be blown for some reason. The fuses on the dishwasher are crucial for working and there is a high possibility that one of these fuses might have blown that can cause you to face this issue. So, you will need to keep an eye on all the fuses and make sure that there is no such blown fuse and that should get the job done for you.
4. Check Bulbs
Lastly, if no fuses are bad either, the only possibility remaining is the bulbs and there is a high probability that some of your bulbs might have gone bad and you will need to replace them. It is pretty easy and LED bulbs are used so you just need to replace the bulbs on your control panel and that should do the trick for you.