A microwave is one of the most important devices that you can find inside the kitchen. Through a microwave, you can easily heat up your food. Most microwaves also act as microwave ovens. You can bake your food using these ovens.
How to Fix Whirlpool Microwave Not Heating?
As already mentioned above, the main use of a microwave is to help you heat up your food. However, some users have complained of experiencing a certain issue with their microwave where it won’t warm their food. Unless the microwave is fixed, it will no longer be of any use at all.
At times like these, the first thing to do is to perform troubleshooting procedures in hopes of resolving the problem. This is why today; we will be telling you about the different ways on how you can fix a whirlpool microwave, not heating. Here are all of them mentioned down below:
- Checking Power
You should most definitely try checking the power first. Start by checking the outlet where you have connected your microwave oven. We suggest connecting any other appliance and checking whether it is able to run properly or not.
It could be a simple power issue due to which your microwave isn’t able to heat your food. Also, check if the circuit breakers tripped.
- Damaged Diode
A diode is a crucial component of the microwave. It is responsible for converting the AC power output to DC. If there is any fault with the diode, the microwave won’t be able to work the way it’s supposed to.
However, before you do anything, we recommend you completely turn off the power. Afterward, simply inspect the diode and check for any potential damage done to the microwave. In case you notice any damage to the diode, you will have to replace it with a newer one.
- Checking the Door Switches
Most microwaves these days come with multiple door switches installed in them. These door switches are used to make sure that the microwave won’t start unless the door is completely shut down. You may have noticed the microwave not turning on whenever the door is not closed.
Similarly, if any of these door switches are defective, your microwave may start malfunctioning, ultimately resulting in not being able to heat up your food. To check the door switches, you will have to remove each and every switch and use a multimeter. Replace the switches which show negative results on the multimeter.
- Issues With the Control Board
Another key component of the microwave is the control board itself. If you haven’t had any luck so far in fixing your microwave, then chances are that you have a defective control board inside your microwave.
You will have to check for any signs of burnt marks or cracks on the control board. Thoroughly search for any such signs. In case you do find any damage on the control board, attempt to replace the whole board as getting it repaired isn’t really recommended.
- Seeking Professional Help
Troubleshooting an electrical component like a microwave requires you to have some sort of mechanical knowledge beforehand. If you are a complete novice, we don’t encourage you to try the troubleshooting process yourself as you could end up doing possible damage to the microwave.
Instead, you should seek professional help. You can either contact Whirlpool’s customer care center or call in a professional. They should have a better idea on what’s causing the issue and should help you further on getting the issue resolved.
The Bottom Line:
Is your Whirlpool microwave not heating? If so, all you have to do is to follow the instructions we have listed in the article above. In case you find any confusion with the article, be sure to leave down a comment below. We will try our best to reach out to you as soon as possible.