The food processors are supposed to spin for slicing, chopping, dicing, and grinding the fruits and vegetables. For the same reason, the Ninja food processor does not spin issue can be pretty irritating. So, if you have a similar issue, you can follow the troubleshooting methods from this article and it will fix the spinning issue!
Ninja Food Processor Does Not Spin
1) Too Much Food
One of the prime reasons that the food processor isn’t spinning is because there is too much food in the containers. In simpler words, the overfilled containers will adversely impact the spinning. We suggest that you take out some food from the container and the blades will starts spinning. In addition, if you are blending something with ice, it might get under the blade and spinning will be impaired.
This is because when the container is overfilled, the blades won’t have space for spinning. This is because the blades will need room for spinning. For this purpose, you will need to take off the container and make sure there is nothing below the blades. Also, try to take out some food chunks to ensure blades move freely.
2) Insufficient Liquid (Depend on the type of food)
To illustrate, if you have added hard food in the container, it will need liquid for blending or spinning the blades. With this being said, the Ninja food processor must be filled with enough water, especially when you have to blend the hard edible. Once you add the water content, the blades will start spinning and the food processor will initiate.
Keep in mind that blades need liquid for spinning properly and cutting down the food ingredients. So, lubricate blades of the food processor with water and spinning will be sorted.
3) Mechanical Errors
If you have already checked the ingredients and have added ample liquid, the food processor might not spin because of the mechanical errors. To begin with, the blades will not spin when the threads are stripped where blades are attached to the shaft. Keep in mind that the motor is responsible for powering the drive that spins the blade.
So, if the components are loose or stripped, the food processor won’t spin. In simpler words, the motor is operating but some components are loose. The users need to understand that the threads tend to wear out with time. So, when the blades aren’t properly connected to the shaft, the spinning will be impaired.
For this purpose, you need to check the rubber gear and replace them if there are stripped threads. For fixing this issue, you will need to call in the technician because they can inspect and repair it better. In addition, if there are mechanical errors when the Ninja food processor is still in warranty, it’s best to call the Ninja customer support and they will fix the mechanical errors free of cost.
4) Power Interruptions
When the Ninja food processor doesn’t spin properly, it might be because of the power interruptions. In this case, we suggest that you take out the power cord of the food processor and insert it into another power source. All in all, you need to ensure that the food processor is receiving continual power.