KitchenAid is a name of excellence, and their kitchen appliances are pretty up-to-date. With the popularity of self-cleaning ovens, KitchenAid launched some as well. However, some people have been complaining about the KitchenAid oven that stopped working after a self-cleaning function. In case your oven has stopped working as well, there are some solutions that you can try.
To begin with, it’s evident that people restart the oven whenever something like this happens, so we are going to skip on that part (if you don’t know, just disconnect the KitchenAid oven from power or gas and connect it after sometime). On the contrary, if you are in search of more specific solutions, we have the details mentioned in the article below!
KitchenAid Oven Stopped Working After Self Cleaning
1. Wait Until The Process is Complete
When you have activated the self-cleaning feature, but the oven isn’t starting, and the door won’t open up, the only solution is to wait. This is because the KitchenAid ovens are designed to keep the door closed when the cycle is operational to prevent the safety hazard. The locking might be extended even after you cut off the heat connecting to make sure you are on the safer side.
To illustrate, the door will remain locked until the oven has cooled down. In that case, make sure that you wait. On the other hand, if the oven door doesn’t open even after hours, you can cut off the circuit breaker to reset the oven and make sure it starts working again.
2. Wiring Issues
The damaged wiring is another reason behind the improper functionality of the KitchenAid oven after you used the self-cleaning feature. The wiring is highly likely to connect to essential oven components of the control board. The wiring is designed with insulation to cope up with the residual heat that comes from within the oven.
However, with time, the insulation on the wiring will tear down, and the wiring will be damaged. In case you use the self-cleaning feature regularly, it’s more likely to damage the wiring and its insulation. Checking the insulation is quite easy as you only need to inspect the wiring. So, if the insulation seems to be damaged, replace the wiring system, and the oven will start operating normally. Not to forget, you have to purchase an oven-specific wiring system to ensure the results are on point.
3. Thermal Fuse
This is a third potential reason behind the stopped functionality of the KitchenAid oven. The ovens are designed with a thermal fuse for keeping the users safe as it switches off the oven automatically whenever the temperature goes too high. When the thermal fuse trips, the electricity won’t be supplied to the heating element, and the oven will stop working.
If you want to check if it’s the thermal fuse issue, know the oven display will be on, but the heating element won’t work. As far as the solution is concerned, you only need to change the thermal fuse, and the oven will be back to its normal operations.