KitchenAid dishwashers are very handy kitchen appliances that can reduce a ton of work and make life easier.
All dishwashers have the option to choose from multiple settings, which are indicated by different lights under each option; when you have chosen a particular option, the light flashes, meaning that the cycle is underway.
Sometimes, these lights start flashing for no reason, or so it seems. If your KitchenAid Dishwasher has its normal and cancels lights blinking, you can fix them in the following ways. Let’s jump straight into it without any further ado!
How to Fix KitchenAid Dishwasher Normal and Cancel Lights Blinking?
- Reset the Dishwasher
There is always a chance of a bug in all things electrical, and the dishwasher is no different. If you have not used the normal or cancel buttons and yet the lights keep blinking, it could be because of some internal bug. These bugs are easily fixable by resetting the dishwasher.
All you need to do is turn the dishwasher off for at least a minute and then turn it on. This should fix the lights flashing problem. There is another solution in this context that can be applied here, i.e., power cycling.
As opposed to shutting the dishwasher off only for a few minutes, as we discussed above, you will have to shut the dishwasher off for a few hours. Preferably keep it switched off for the night.
This should give it enough time to fix any problem it has, and the lights might stop blinking then. Once done, turn on your KitchenAid dishwasher and see whether the normal and cancel lights are still blinking or not. If they do, there could be something wrong with its settings.
- Delayed Start Setting
One reason why the lights on your KitchenAid dishwasher may be flashing is the delayed start setting. You might have pressed the wrong buttons accidentally, which makes the lights flash off.
When you accidentally nudge the delay start setting on, the lights will keep blinking until the door of the dishwasher is shut. So remove anything that might be in the door’s way, and shut it tightly. This will stop the lights from flashing.
The primary reason behind the lights flashing on your dishwasher in most cases is some malfunction in the control panel. The control panel is a key component of a dishwasher as it allows you to select cycles or other features of the dishwasher.
You can access the control panel easily. A fix for when your control panel seems to be not functioning is to unplug the control panel. There is a power ribbon connected to the control panel, which you can unplug and then plug in again after a while.
Unplugging and replugging the control panel will reset it. Doing this will hopefully stop the normal and cancel lights from blinking too much.
When you are resetting the control panel, make sure that you have unplugged the dishwasher from the main source while you are doing it. If not, you can end up damaging the control panel, and it won’t be safe either.
- Jammed Buttons
Sometimes the buttons on the dishwasher can get jammed, either because they were pressed too hard or because something got stuck. If buttons on your KitchenAid dishwasher get jammed, they can cause the cancel light to keep blinking.
You can work on the buttons yourself to loosen them up and remove anything that has gotten stuck in the controls.
If you are unable to loosen the keys yourself, then don’t sweat it or work at it too hard, as it may damage the buttons permanently. The best thing to do in this situation is to get a professional to help you out.
The Bottom Line
It is not uncommon for normal and cancel lights to blink in the KitchenAid dishwasher. There are multiple things that can set these two lights off and cause them to blink incessantly.
If the normal and cancel lights are flashing in your dishwasher, then try the above troubleshooting methods. If, even after troubleshooting, the lights continue to blink, then we suggest you contact KitchenAid support or get the KitchenAid dishwasher inspected by a professional.