Thermador is a great brand for all home appliances and kitchen equipment. They make some of the best dishwashers with a spacious capacity and effective features for a quick and reliable dishwashing experience. However, at times, you can also face certain errors on these appliances. In most cases, these issues include the dishwasher not draining properly. The Thermador dishwasher is designed to drain the water automatically, but if the automatic process isn’t working, you can do it manually. So, if you are wondering how to drain the Thermador dishwasher manually, this article will be a great help!
How to Drain Thermador Dishwasher Manually?
1. Turn It Off
To begin with, you have to turn off the dishwasher for safety purposes. So, turn off the dishwasher before you begin the manual drainage process. Many people just turn off the dishwasher through the power button, but it’s recommended that you disconnect the power cord to prevent the chances of accidental electric charges. In addition, disconnecting the power cord will secure the unit from component damage.
2. Remove The Bottom Rack
The next thing that you need to do is remove the bottom rack. There is a filter at the bottom of the dishwasher that needs to be removed if you want to drain it manually. It is pretty easy to take off the bottom rack as you only need to take off the screws. As far as the filter is concerned, just twist the filter counterclockwise and lift it to take it out.
3. Rinse The Mesh
Removing the filter from the bottom rack will show the mesh that’s installed under the filter. The mesh has to be cleaned. The removal of the filter will drain the dishwasher but make sure you clean the filter as well as the steel mesh to make sure the dirt or grim doesn’t clog the filter – the clogged filter can prevent proper drainage.
4. Reinstall The Filter
After you have rinsed the filter and steel mesh thoroughly and the dishwasher is drained as well, the filter needs to be installed back properly. The filter must be installed into its socket tightly, so make sure it clicks in. To install the filter, just put it on the filter compartment, push gently on the sides, and the filter will be fully installed. If the filter is not installed firmly, clean the filter area.
5. Replace The Bottom Rack
Now, if you don’t want water leaking all over your kitchen floor, you must replace the bottom rack as well. It is designed to lock the filter in its place and ensures that the water is drained thoroughly each time you press the drain button on your Thermador dishwasher.
The bottom rack is placed right above the filter, and you have to rotate the cap clockwise a few times to properly lock it in its place. As a result, the dishwasher will be manually drained, and the filter will be clean as well. Make sure that you follow all these steps accurately to prevent damage to the dishwasher components. In case you need assistance, it’s best to hire a repair person!