GE is a popular brand when it comes to microwaves. There are lots of people who buy their appliances and their microwaves in particular because of how reliable they usually are.
These usually have lots of good features to make the most out of, but there are also a lot of different issues which can randomly occur that might make it difficult for one to make the most out of them.
There’s one issue in particular that makes it impossible to use any of the features at all, which is one regarding there is no power for the GE microwave at all.
We’re here today to discuss this issue and what users need to know about it, particularly the main reasons why that it might occur along with the best possible solution for it in each case. Our list of solutions for this issue is given below, so continue reading to learn more about the matter.
Keep in mind that these aren’t the only solutions, but instead are the ones that tend to work best for a majority of users.
GE Microwave Troubleshooting No Power
- Faulty Switch
The first thing to ensure is that the switch in which the microwave is plugged inside isn’t the culprit responsible for this issue. There are many cases such as these in which it turns out that the switch was at fault, which is why we recommend that you grab your microwave and place it somewhere else where there’s an electrical outlet nearby.
Now just plug it into this new electrical outlet to see if it works properly or not. There shouldn’t be any issues with it at all once you try this, but if the problem still persists, it can be said without too much doubt that the microwave is in fact responsible for the issue. Move on to the other solutions given below if that’s the case.
- Faulty Thermal Fuse
The thermal fuse is easily one of the most important components inside of the microwave for a number of different reasons. All of these reasons can be summed up to as things related to your safety, as well as the longevity of the appliance.
The thermal fuse performs the very important job of managing the heat inside of the microwave. It makes sure that there’s only a set amount of heat being provided to the food stored inside of it.
It does so by ensuring that the microwave never overheats. On the very rare occurrence that it does, however, the thermal fuse blows and causes the entire appliance to shut down immediately to prevent any serious issues.
This isn’t really as serious as it sounds, as thermal fuses can easily be replaced every single time that they blow. That said, you might want to use some tools to check your microwave’s thermal fuse to see if it needs to be replaced or not.
- Faulty Line Fuse
Up next is an issue that is very much like the previous one in terms of concept. The major difference is that instead of focusing on the thermal fuse, this specific solution focuses on an equally important component, which is the line fuse.
In the same way that thermal fuses manage heat and make sure that temperatures don’t get too high, line fuses control voltage and ensure that the current being supplied never gets too high.
When it eventually does get high, this fuse also blows, ultimately resulting in the entire GE microwave ceasing function. Once again, the solution requires you to first confirm whether or not this is the case. Use tools to inspect the appliance from the inside and check the component. If it appears shattered or badly damaged, get it replaced immediately before trying to turn on the microwave once again.
- Take it to an Expert
The three solutions we’ve mentioned so far are ones that should work for a majority of users without any problems, but on the off chance that they weren’t as helpful for you, there’s only one thing left to try. We recommend that you take your microwave to a repair store, as there’s a very specific issue with it that experts will be able to tell you more about once you show them your GE microwave.