Our homes are incomplete without a fridge because how else will we store the leftover food? This is because the fridges cool down the food and even freeze them to ensure they are edible for a longer time. However, when GE Fridge not cooling issue happens, it can cause too much chaos because the food will go bad. So, if you are ready to fix the cooling issue, we’ve got the solutions for you!
GE Fridge Not Cooling
1) Check The Gaskets
The fridges create cooling but retaining it is the actual thing. For this purpose, the doors are sealed with rubber gaskets which help close down the fridge’s door properly. In simpler words, it ensures sealed closure to ensure the cooling doesn’t escape from the fridge. On the other hand, when the gasket doesn’t work properly, it won’t be able to trap the cooling inside. In the majority of cases, the gasket could be damaged or dirty which results in ineffective sealing.
By the point, it’s pretty clear that you should replace the gasket and get a new one if there are damages. However, if it’s only dirty, clean it up and you will experience improvement in the cooling. As for the symptom, you can be assured that gasket is the issue when there is sudden food frosting. Anyways, get the gasket replaced and the cooling will be optimized in no time.
2) What About Lights?
We all know how important light is for a fridge. The light in the GE fridge might be the reason why there is inefficient cooling. Whenever you close the door of your fridge, the switch available on the door’s outer facing will switch it off. However, when this switch is damaged or is malfunctioning, the light will remain on. Keep in mind that constantly switched-on light will produce heat which brings up the temperature, hence lesser cooling.
To see if the light is the issue, you must check the fridge’s switch and press it with a finger. Also, see if the light switches off when you press the switch. If the light doesn’t go off, the switch isn’t working and it must be repaired. The switch can only be repaired by a professional technician, so hire one and get the switch repaired. Once it’s repaired, the light will go off when the door is closed, hence better cooling.
3) Evaporator Coils
As we are talking about the GE fridge, there might be some error with a self-defrosting function that’s causing the cooling issue. According to the technicians, if the freezer compartment’s back is covered with frost or rice, the coils are highly likely to be frozen which results in improper cooling. Keep in mind that you should remove the back panel because it covers the evaporator coils (you’ve to look for the frost, right?).
If you see some frost, keep the freezer compartment’s door open and take out all the perishable food. Now, let the frost melt off and it will eventually start cooling properly. Some people also use the hairdryer in warm settings to fasten up the melting process. However, let us tell you that it’s a temporary fix and you’ve to get the faulty components repaired if you don’t want to go through the same hassle again. If you are concerned about the component, replace the thermostat or thermistor.
4) The Fan Motor
To be honest, it’s pretty explainable and straightforward. When the fan motor doesn’t work as it should, cooling will be an issue. The fan is generally placed on the fridge’s back and it needs to run continuously to ensure the condenser coils are getting the air (the fan circulates the air). So, you should open the fridge’s door for three to four minutes and see if the fan comes on. If it doesn’t, you are assured that the fan motor is the real issue and it’s to be replaced. Keep in mind that the fan motor should be replaced because repairing doesn’t offer the effectiveness that you need.
5) Temperature Settings
The cooling issue might occur when you’ve selected incorrect temperature settings. We suggest that you consult the GE Fridge’s manual and see you’ve chosen the incorrect temperature settings. The optimum solution is to reset the temperature settings of your fridge and it will streamline the cooling. Keep in mind that resetting the temperature settings will set the default settings (these settings are best for proper cooling). As a result, the cooling will be optimized.
6) Overstuffing
If you cannot find out any technical issues as a part of troubleshooting, there might be chances that you have overstuffed the fridge. This is because when you put more stuff than your fridge can handle, it will cause cooling issues. In addition, it can block the fridge’s air vents which results in ineffective cooling. In addition, the airflow will be restricted when there is too much stuffed into the fridge, so unload some food items from the fridge and you will see improvement in cooling.
7) Condenser Coils
With the fridge’s cooling issue, there are high chances that the condenser coils are greased up or have dirt accumulated on them. This is because the heat is released through these coils and grease will restrict the heat flow. In addition, it can increase the overall temperature of the fridge. As a result, the cooling will be adversely impacted and it might be limited. For this purpose, you should clean the dirty coils properly.
For this purpose, you’ve to switch off the fridge, remove the net/grill, and use a vacuum attachment to clear off the dust. In addition, you should use a wet cloth for cleaning the coils properly. Once these coils are clean, switch on the fridge and check the cooling. All in all, these coils have to be cleaned regularly to ensure you don’t struggle with cooling in the first place. Last but not least, if you don’t have a vacuum attachment, you can also opt for an appliance brush for clearing away the dust.
If the cooling issue still remains, there are higher chances of internal component failure which should be checked by professionals, so call them up!