3 Common Frigidaire Air Fryer Oven Problems (Troubleshooting)

frigidaire air fryer oven problems
  • Save
frigidaire air fryer oven problems

Frigidaire is one of the most promising brands out there, and they have designed the oven with an air fryer built into it. On the contrary, some users have been complaining about the Frigidaire air fryer oven problems. These problems can lead to cooking performance. With this article, we are sharing the common issues as well as the troubleshooting methods!

Frigidaire Air Fryer Oven Problems

1) The Air Fryer Oven Doesn’t Heat Up

Igniter

The igniter is responsible for heating the air fryer oven. The igniter is designed with two basic functions. First of all, the igniter will draw the electric current through a safety valve. Also, it gets hot that ignites up the gas. If the igniter gets weak, the valve will not function, and the oven won’t heat up. For this purpose, you will need to replace the igniter.

Bake Element

The Frigidaire air fryer oven is designed with the bake element, and it needs to heat up properly. In case the bake element doesn’t heat up, there will be a heating issue. In this case, you will need to inspect the bake element and make sure it hasn’t burned out. In addition, you must check there are no blisters and holes in the bake element. You can use the multimeter for this purpose.

Power Issue

The Frigidaire air fryer oven is designed to work with 240v. If there isn’t proper power transmission, it will result in a heating issue. You will need to connect the air fryer oven to another power source. It will ensure that the air fryer oven is receiving uninterrupted power. Even more, you can utilize the multimeter for checking the power transmission.

Thermal Fuse

The air fryer ovens are designed with a thermal fuse that tends to trip if it gets too hot. Similarly, if the thermal fuse has blown up, it will lead to heating issues. You will need to use the multimeter to check the continuity of the fuse. If you observe the continuity issues, you will need to replace the thermal fuse.

Wire Connection

Be it burnt wire connections or loose connections, they result in heating issues. In particular, the wires responsible for supplying power to the igniter might have burnt out. For checking if the wire has issues, you need to inspect them. The burnt wires have to look burnt. On the other hand, if the wire is loose, you can simply tighten it up. However, the burnt wire has to be replaced.

2) Making Excessive Noise

Nobody likes the air fryer oven that’s making too much noise. The noise issue incurs because of two prime reasons. First of all, when the fan rotates at high speed, it will generate excessive noise. The fan is responsible for keeping the equipment cooled down. In case the noise is being produced by the fan, you don’t have anything to worry about.

On the other hand, excessive noise is also produced if the components in the air fryer oven have come loose. This usually applies to the rattling noises. If that’s the case, you need to take out the power plug and let it cool down. Then, clean the interior of the air fryer oven and inspect the elements. If there are loose components, just tighten them up and make sure everything is securely connected into place.

3) Inaccurate Temperature

Igniter

The igniters are responsible for heating up the air fryer oven. When you have an inaccurate temperature issue with the Frigidaire air fryer oven, it’s mainly because of weak ignite. You will need to check the igniter and make sure it hasn’t worn down.

Thermostat

In particular, we are talking about the temperature control thermostat. It is responsible for monitoring the temperature in the air fryer oven. That being said, if the thermostat has incorrect calibration, it will not cycle up the heat. Similarly, it will lead to either higher or lower temperatures than required. You will need to call the technician, and they will repair or replace the thermostat.

Temperature Sensor

The air fryer ovens are designed to work with the temperature sensors connected to the control board. It is basically important for regulating the temperature. That being said, if the temperature has incorrect resistance, it results in an inaccurate temperature issue. If that’s the case, you need to recalibrate the air fryer oven!

  • Save
Share via
Copy link
Powered by Social Snap