There are tons of utensils that you can buy for your kitchen which will help you in cooking faster. Although, you should note that having the right equipment is also necessary to help you feel at ease.
One of the most important devices that you can get for your kitchen is a refrigerator. These devices help in storing your edibles which can rot easily when put outside. Considering this, you can leave your items in your fridge for days without them going bad.
Some devices even have a separate compartment to freeze things. Talking about this, fridges are an amazing device but some problems can be found with these. Recently, some users have reported that their fridge is not cooling but the freezer is working.
If you are also getting the same issue then going through this article should help you out. We will be providing you with some troubleshooting steps that can be used to fix this problem.
How to Fix Fridge Not Cooling But Freezer Works?
- Check Temperature Settings
Many companies manufacture fridges and freezers for their users. All of these are equipped with different features and configurations. Considering this, it can be hard to pin down the exact cause of your problem. Although one easy way to get rid of it is by checking all the parts one by one. Most fridges have a temperature control system on them that allows you to adjust their settings.
This should be on the control panel of your device that can be accessed by opening the front door. Sometimes people can accidentally switch the fan settings when putting something in their fridge. Considering this, the temperature inside your device might have been set too low which is preventing it from cooling. Simply adjusting the thermostat should help you in getting rid of your problem.
Though, keep in mind that some fridge has a dial that has 0 as its coldest option and some have 6 or 9 as its coldest option. You can either test out both options to see which one’s works for you. Alternatively, try reading the manual provided along with your device. This should contain information on what temperatures the different fan speeds provide. You can then use it to adjust the temperature settings and fix your problem.
- Defrost System
If you notice that the temperature settings on your fan are working correctly. Then the next thing that you should check is the defrost system on your fridge. This is responsible for removing frost from your device which gradually builds up on the coils. Different components are connected within the defrost system. These include a thermostat, a heater, and a timer. The evaporator coil is used to keep your device cooled down.
Although, this starts to form layers of frost on it which have to be removed by the defrost system. If not done correctly then the frost build-up on your coils will start preventing air from flowing through it.
Considering this, the defrost system must remove all this ice from the coils to keep your fridge working. The timer usually has a limit set to it after which the system can start defrosting. If the time between defrosts is set too high then that might be why your device is not working properly.
Lowering the defrost time, in this case, will fix your problem. Aside from this, the thermostat has to measure the temperature and then alert the heater when a defrost is required. If there are any problems with the heater or thermostat then these might stop working. You can test them out to see if these have broken down. One easy method is to remove the ice from your coils after you have fixed the timer.
You can pour warm water over the frost to melt it. Now leave your fridge for a few days and see if the problem happens again. If it does then you will have to get some of the parts from the defrost system replaced. Trying to find what part exactly has become faulty can be quite difficult. This is why you should contact the company you had bought your fridge from instead. They should be able to help you with fixing the issue. Some companies even provide their users with a warranty service that can be used. If you still have that then you should be able to get a discount on your repairs.
- Thermistor and Evaporator Fan
An Evaporator fan is installed near the coils of your fridge. These are then used to push the cold air from the coils and then spread it all around the device. Considering this, if the fans stop working then your device will still produce cold air but it will not be circulated. This can cause it to stop cooling as most of the cold air will just become frost near the coils.
On the other hand, thermistors are sensors installed in your device. These will detect the temperature and then send this data to the main control board. This keeps the temperature in check allowing the system to work efficiently. Although in case the thermistors have broken down, your device will stop cooling. While both of these are entirely separate equipment.
The reason why we have decided to put them in the same troubleshooting step is because of their fix. You can use a voltmeter to take readings of both of these parts. This will help you in noticing if there are any issues with the system. You can then get these parts replaced with new ones to get rid of your problem.
Just make sure that the parts you purchase are from a reliable store and are also compatible with your fridge. You can even contact the company you got your device from and ask them for replacement parts. Alternatively, just send in your device for repairs. This is better for people who do understand how the insides of their fridge work. It can be quite dangerous to replace parts like these on your own.