FoodSaver is one of the leading manufacturers of vacuum sealers, and all their models are designed to limit food wastage and preserve the flavor and freshness of the food.
These vacuum sealers are designed to keep the food fresh for five times longer as compared to regular storage methods, such as containers, foils, and zipper bags.
These vacuum sealers work by drawing out air and moisture from the food and sealing the bag to make sure the food isn’t exposed to oxygen or moisture.
The extracted moisture is put in the drip tray. However, many people have been asking about the FoodSaver tray full alarm and what it means. So, let’s get into details!
What To Do When The Drip Tray Is Full On FoodSaver?
The FoodSaver vacuum sealer has been designed with a drip tray – the company has designed a removable drip tray, so you can easily unload it.
The drip tray is made from plastic, which promises easier cleaning, and you can take out the drip tray and wash it – the drip tray can be washed in a dishwasher as well.
When the drip tray is full of excess liquid, the vacuum sealer will turn off, and the tray full indicator light will also turn on.
In case you have a similar alarm, we are sharing how to clean the drip tray when it’s full;
- First of all, you have to turn off the vacuum sealer and take out the power cord
- Open the door of the appliance and press the release buttons
- Then, rotate your vacuum sealer and take out the drip tray
- Empty the drip tray in the sink and clean it with a mild soapy solution
- Lastly, just dry the drip tray and put it back into the vacuum sealer
The lower drip tray as well as the bag detection tray are removable, so you can clean them. Both these trays are dishwasher-safe, but you’ve to put them on the top rack.
The experts recommend emptying and cleaning the drip tray after every use. In addition, you must unplug the vacuum sealer before cleaning and put the housing carefully on a counter.
On the other hand, if you don’t know how to remove the drip tray, all you have to do is to lift the tabs on every end (the bag detection tray can be removed the same way).
Many people make the mistake of pulling the flags on the detection tray, but it’s not recommended. Also, you must wash the trays with a warm and soapy water solution.
As far as the gasket is concerned, keep in mind that it’s made from rubber and has to be cleaned. In addition, a gasket should be replaced regularly to ensure proper sealing.
Once the drip tray and bag detection tray are cleaned, you must dry them before installing them into the vacuum sealer. To put the trays in place, follow the below-mentioned steps;
- Snap the left side of your drip tray down
- Put the lower gasket into the gasket channel
Many people don’t know this, but the drip tray has been designed with adjustable food sensors, and the drip tray has to be cleaned and dried to make sure the sensors work properly.
Tips To Maintain The FoodSaver Vacuum Sealer
FoodSaver vacuum sealer is one of the most reliable vacuum sealers available in the market. However, it’s still prone to performance issues, which is why proper maintenance is important.
Proper maintenance of a vacuum sealer helps increase the lifespan of your unit and will ensure efficient sealing of the food. So, follow the below-mentioned steps;
- You must be careful while filling the vacuum sealer bags because many people make the mistake of overfilling the bag. Ideally, you should leave around three to five inches of clear space in the bag to make sure the air and moisture can be sucked out. In addition, it will ensure proper sealing of the bag
- Make sure you invest in vacuum sealer bags because regular bags cannot be used in vacuum sealers. It’s recommended that you purchase the branded bags to make sure there are no compromises on sealing performance and efficiency
- Whenever you seal the food, make sure you write down the date on the bag. The vacuum-sealed bag can stay fresh for over three weeks. In addition, you can keep the sealed bags in the freezer if you want to store it for longer
- Once you are done using the vacuum sealer, you must clean the debris and food particles because they can interfere with the vacuum sealer’s ability to seal the bags. After every use, you should clean the vacuum sealer thoroughly and clear the drip tray
- Before you vacuum-seal the frozen food, make sure the food is fully frozen and invest in a filter. The filter will help protect the mechanism of the vacuum sealer and prevents jamming
- Whenever you clean the vacuum sealer, make sure you use a mild soap solution. This is because the harsh cleaning products have toxic chemicals, which can cause damage to the appliances and put you at risk of health hazards as well
- Always use a damp cloth to clean the vacuum sealer because a wet cloth will cause water drippings in the vacuum sealer. In addition, you must take out the power cord to protect yourself from electrocution. Also, turn on the vacuum sealer once it’s dried
- The soap residues must be removed and cleaned because they can lead to bacterial buildup. That’s because soap residues can attract dust and dirt if not cleaned away. In particular, you can use a dry cloth to wipe the soap residues
The Bottom Line
On a concluding note, FoodSaver is a reliable vacuum sealer and promises exceptional sealing capabilities.
However, the drip tray has to be regularly cleaned and wiped dry to make sure there are no compromises on the sealing (a full drip tray fails to seal the bags). Lastly, always opt for a mild soap solution to clean the drip tray!