A range hood is an electronic device containing a mechanical fan that hangs over the stove to suck the heat and other fumes out of your kitchen. It acts as an air filtration system and prevents gas, smoke and steam to grease in your kitchen. They also have lights installed in them which are really helpful when cooking.
Broan Allure Range Hood Lights Not Working
One of the best range hoods is offered by Broan allure range hood. But many users are facing problems such as Broan allure range hood lights not working. If you are also facing such an issue than this article might guide you resolve the problem.
- Lights Have Burned Out
It is possible that the lights have been burned out due to excessive use. Unfortunately, checking whether the lights are burned or not is not as simple as giving them a look. A multimer is required to check the possibility. If the lights really are burned out than replace them with a new one.
- Wire Failure
It might also be a case that the wires are not of good quality and might even be damaged. Unplug the power supply to the range, open the control panel. If you see any damaged wire than replace the wire with a new one. If the wires are simply not connected than connect them as required.
- Broken Light Switch
Some Broan allure range hoods use light switches to control the lights. The light failure may be due to a broken light switch. For this, switch off the power supply to the range, use multimeter to check the current flow. If the current is not flowing properly then the light switch needs to be repaired. If repairing the light switch does not work, then a replacement might be needed.
- Failed Control Board
The lights may also not be working due to a failed control board. To check the control board, unplug the range and unscrew the board. If burned marks are seen than the board has been damaged and requires repair. If it does not work even after the repair than you might have to replace it.
- Professional Help
If none of the above-mentioned solutions work for you then it is recommended to contact professional help. Call a technician or contact the customer support service of the company. They will help and guide you in solving your problem further. Also, make sure that you are as cooperative as possible throughout the whole process.
Conclusion
The article provided you with some possible solutions to the problem Broan allure range hood lights not working. By following these instructions, you should be able to resolve the problem with ease.