A bread machine, also known as a bread maker, is a popular home appliance that is mostly used in order to help the user be able to make bread in his own house. In order to bake bread, all you have to do is to put the raw ingredients inside the appliance.
How to Fix Bread Machine Paddle Not Turning?
Just like any other appliance that you may have in your kitchen, a bread machine is bound to run into errors or problems after extended use. At times like these, it is recommended to apply troubleshooting procedures that help in resolving the problem.
Today, we will be using this article to help you troubleshoot a popular issue with the bread machine where the paddle stops turning. So, here are ways on how you can easily fix the bread machine paddle not turning:
- Faulty Timing Belt
The most common reason why the paddle of a bread machine may start acting up is due to the timing belt which might have undergone damage. To check this, you will have to remove the pan from your machine and turn it upside down.
Proceed by unscrewing the 4 rubber feet from the corners using a screwdriver. After you take the metal bottom plate off, take the bread maker to any local auto parts store or try a spare timing belt if you do have one at your home.
Timing belts are usually durable and don’t break off that easily. This means that if your issue really was due to a faulty timing belt, getting it replaced should get the machine function just the way it’s supposed to. Furthermore, the timing belt should last you quite a lot of years.
- Cleaning the Shaft
Another highly likely reason behind the issue could be a dirty shaft. It could also be simply stuck in the pan which is causing the paddle to not turn at all. In either case, you will have to start by removing the shaft from the pan.
Once you remove it, we recommend that you thoroughly clean the shaft. Afterward, make sure that you apply some lubricant. Do keep in mind that you will have to remove the snap ring in order to lube the shaft.
Our recommendation would be to use something non-toxic. If you can, try using silicone grease which should work wonders as a lubricant. This is actually pretty common in most bread machines as, over time, the shaft present inside these appliances gets stuck in the pan. However, applying the above-mentioned fix should get it resolved in no time.
- Get Professional Help
If both the mentioned steps didn’t seem to do anything for you, then it is possible that there is some other technical issue that requires further inspection. However, at this point, we really recommend that you start seeking professional help.
Getting the bread maker to any local repair shop or calling in a verified professional at your home should do the trick. Regardless of what you decide to do, they should thoroughly inspecting the bread maker and telling you the exact reason why it has been acting up. They should also be able to tell you about an estimate on the cost of repair.
Alternatively, you can try calling in customer care service if you have purchased the bread machine from a reliable brand. They should have a better idea of how the issue can be troubleshot. If the machine’s still under warranty, you should be able to get it repaired or replaced without paying a single penny!
The Bottom Line:
Is your bread machine paddle not turning at all? This article contains instructions on how the issue can be easily troubleshot and fixed. All you have to do is to follow these instructions. In case of any confusion, be sure to leave down a comment below in the comment section.