An Aroma pressure cooker offers endless convenience and lets you cook up an array of mouthwatering, healthy meals with very little fuss at all while slashing conventional cooking times.
Once you get used to using your pressure cooker, it’ll be unlikely that you’ll want to go back to cooking without one.
This is why we fully understand the pain, shock, and horror of turning your machine on only to find Aroma pressure cooker error code E4 flashing before you.
Fortunately, we’re here to hopefully help you sort out your annoying malfunction in no time.
How To Fix Error Code E4 On Aroma Pressure Cooker?
Error code E4 on your Aroma pressure cooker is an indication of a general electronics malfunction.
You’re going to need to troubleshoot further and hopefully recover the unit’s full function if something isn’t damaged. Here are the common culprits for error code E4.
- Ensure a flush seal
E4 is most often an indication that your pressure cooking isn’t building up pressure correctly.
Switch it off and check the seal. Make sure that there’s no air escaping, with the rubber helping to make a flush closure.
- Look for the valve cover
The inside of your Aroma pressure cooker’s lid will have a valve cover that needs to be removed before use. Make sure that yours isn’t still present.
- Clean the pressure release valve
Prolonged use of the cooker without thorough due cleaning of the pressure release valve will lead to clogging.
Clean your lid and pressure release valve to verify that this isn’t the cause of Aroma pressure cooker error code E4.
- Verify whether the fuse is burned
Check beneath your cooker for a fuse. Alternatively, consult the manual to find the location and ensure that the fuse is still intact.
If it has burned, source a replacement from a local hardware or electronics store. Replacing a fuse is something you can do at home.
- Dry the cooking container
Ensure that the cooking container/inner pot is completely dry. The cooker could detect a break in connection due to the container or heating plate being slightly damp. Dry both.
- Attempt removing the cooking inner pot
In many cases, an E4 error can simply be indicating that the inner pot/container isn’t detected on the heating plate. Remove the pot and replace making sure it’s securely in place.
- Clean the contacts
There’s a chance that your Aroma pressure cooker may not be receiving a steady stream of current.
Take the pot off the stand and use a little sandpaper to scrape the contacts. It doesn’t take more than a little light cleaning to eliminate improper contact from the equation.
- Look for signs of overheating
A pressure cooker overheated will feel warm to the touch when you inspect the area near the base and electronics.
Unplug the unit and let it cool down for at least 30 minutes if you suspect overheating.
- Consult your Aroma pressure cooker’s manual
If none of the above helps to restore your unit’s functionality, then consult your user manual.
Aroma pressure cooker error E4 may be pointing out a small fault concerning your machine’s assembly or operation.
- Call Aroma customer care
Your local Aroma Customer Careline will be able to help you confirm that your pressure cooker is broken.
Customer care will also point you in the nearest repair agent’s direction if your device doesn’t still fall under its warranty.
A technician can often repair minor electronic faults. Either seek out an appointed Aroma representative or consult an expert of your own.
E4 Error Still Persists? Trust In The Aroma Brand
As the proud owner of an Aroma appliance, rest assured that you’ve bought one of the most trusted brands around.
Any issues, even serious electronic errors, can normally be solved within no time. Most customers report customer care to be friendly and efficient.
However, if you do go to a private repair outlet or agent, you’ll most likely still get your problem resolved in no time, thanks to the outstanding manufacturing and widespread use of Aroma pressure cookers.