Ice makers are a convenient and quick way of making ice. In simpler words, you don’t have to wait hours for the freezer to make ice. For this reason, many electric appliance brands have started making ice makers in their refrigerators but Amana ice maker leaking remains a common issue. So, if your ice maker is leaking rather than making ice, we have a troubleshooting guide to help you out!
Amana Ice Maker Leaking
1. Water Inlet Valve
When it comes down to the ice maker, it is designed to work at a minimum of 20psi to shut down. However, when the water pressure goes low, the water inlet valve will not close down even if the power is turned off. As a result, the valve will start leaking water into the ice maker and it will start overflowing. For this reason, you must check the water pressure and ensure it’s 20psi. If the water pressure is sufficient, there are chances that the valve is damaged because it might not be shutting off completely. In such cases, you must replace the valve and it’s better to get it checked by a professional for effective outcomes.
2. Assembly
The second component to check is the ice maker assembly. This is because it’s the primary component behind the functionality of the ice maker, so if it’s not working properly, the ice maker will leak. For this reason, you must get the assembly checked and replace the entire assembly.
3. Level It
When the ice maker is not properly balanced, it will result in water leaking from the refrigerator. That being said, you need to level the refrigerator and it might stop the leaking. It is primarily because when the refrigerator rocks, the drain tray will spill, resulting in leaking. For this reason, you have to get the refrigerator leveled and you can follow the below-mentioned instructions;
- Unscrew the bottom of the refrigerator at the refrigerator’s bottom and you will see the leveling legs
- The leveling legs can be turned around to level them. To illustrate, you can turn them in the counterclockwise direction to lower the leveling legs and vice versa
- When you have adjusted the leveling legs, you can use the level of confirm the leveling and put the bottom back on
4. Check The Drain
The drain is designed to transfer the water generated during the defrosting process to the drain tray. However, if some food item gets into the drain, it will be clogged and ice will start forming in the drain. As a result, the water that should be flowing down the drain will start overflowing, creating the narrative of ice maker leaking. If only ice is blocking the drain, you can simply switch off the ice maker to thaw it out. On the other hand, if some food item is stuck, you will need to remove it to streamline the water flow.
5. Drain Tray
The drain tray is located at the refrigerator’s back bottom and it is responsible for collecting water that’s produced during the defrosting phase. So, if the drain tray is damaged, water will start leaking from the ice maker.