Dishwashers have become the epitome of convenience and it wouldn’t be wrong to say that helps save a ton of time. For this reason, it has become a promising choice for people who don’t have time to scrub the dishes by hand. On the contrary, various dishwasher brands have surfaced in the industry but Amana dishwashers have truly made their mark. Still, there are some issues associated with it, including the Amana dishwasher no power. If you are also struggling with the no power issue, we have the troubleshooting guide for you!
Amana Dishwasher No Water Issue
1. Door Closure
If you are saying that the dishwasher doesn’t have power because it’s not working, the first thing you need to do is check the door. This is because the dishwashers are programmed to start working when the unit is properly closed. Having said that, if the door of your dishwasher is not fully closed, you need to close it and see if the dishwasher starts working. In addition, keep in mind that the door of your dishwasher should be closed within three seconds of pressing the start or resume button on the dishwasher. So, make sure that you open the dishwasher door and close it before you press the start or resume button on the unit.
2. Power Supply
If the door is not the issue, there are chances that there is an actual power supply malfunctioning with the Amana dishwasher. For instance, if the dishwasher is designed with a plug-in power cord, make sure that the cord is well plugged. On the other hand, if the dishwasher has a direct wire configuration, you must ensure that the wiring is properly connected. You can consult the dishwasher manual to look for the wiring connections.
3. Water Supply
When there is no power in the dishwasher unit, there could actually be a problem with the water supply. You need to ensure that the hot water supply is switched on and the water valve is kept open. Once the water supply is properly restored and connected whenever you have to use the Amana dishwasher.
4. Control Lock
The control lock is designed in the dishwasher to prevent the chances of accidental use or cycle activation of the dishwasher. When the control lock is turned on, the buttons will be disabled and the dishwasher won’t have power. For turning off the control lock, you have to press the control lock button and hold it for three seconds. On the contrary, if holding the button doesn’t work, you will need to disable the sleep mode or simply restart the dishwasher.
5. Reset
Hold your breath because this could be your only way of fixing the no power issue. The reset instructions are quite simple as you have to disconnect it from the power connection and make sure the dishwasher is switched off for at least two minutes. After this time, plug in your Amana dishwasher. On the other hand, the dishwasher has hard wiring, you can just switch off the breaker and switch it on after some time.