Frigidaire is the brand that is not only best for having the refrigerators but their refrigerators are also pretty great in terms of getting you the best possible ice and water quality on them as well. They come with water filtration on them that will be helping you out to ensure that you are getting fit to be consumed water for all the different applications that you can possibly be looking for.
Yet, the filter needs to be replaced as well from time to time to make it work properly for you. If you are looking to replace the filter on your puresource 3 water filter, here is how you can get it done.
How To Replace Puresource 3 Water Filter?
1. Remove the water filter
The first thing that you will need to do about replacing the water filter is to remove the existing water filter. It is pretty easy to get it done, once you locate the filter. So, you will need to push on the filter a bit inwards and then you will have to pull it out once you hear the locks to be disengaged. You will need to be careful about keeping the filter straight while you are pulling it out. That should ensure that you are not damaging the filter housing, or the filter.
2. Remove the protective caps from the new filter
The next thing that you will need to be careful about is removing the protective caps from the new filter that you are trying to install on the puresource 3 water filter. You need to be careful about the protective caps as you must not be damaging the filter, while you are at it. Also, they must be removed from the filter before you install it on the refrigerator.
3. Slide it in
Once you have removed the filter caps form the filter, you will need to slide it in the filter housing vertically and then once it is in place, you will need to gently push it from the middle to have the locks in place. That will be helping you out to ensure that you are properly locking in the filter so it is not leaking or causing you some other issues.
If the filter is not locked in properly, it can cause you to have certain issues and problems like leakages, not working properly and contaminants finding their way in the water that you wouldn’t want to have.
4. Prime the filter
Lastly, you might think that you have done it all, but that is not it. You will also need to prime the filter properly so that it can be used. To do that, you will have to run the water for at least 3 minutes for the filter to be properly primed with the water. You can discard the water that you run for these minutes and once that is all sorted out, you can use the filter properly to be having the right purification with the water and ice from your Frigidaire puresource 3.