For such things in the kitchen that require more cleaning than just washing up, you cannot take any risks to have any sort of contamination on them. That goes for baby bottles, pacifiers, teethers, and more. As kids are prone to be affected more due to bacteria or any other such problems, you will need proper cleaning and sterilization for all such needs you can possibly be having. So, you will need a sterilizer such as papablic bottle sterilizer to get the job done for you.
It has tons of interesting features that one will love to be having, including steam, drying, and deodorizing those bottles for you. However, that is not all. While the papablic bottle sterilizer offers great utility for you to clean up all such plastic parts that you can have, you will also need to know how you can clean it up periodically to ensure that you are getting it fixed up properly. Now, if you are trying to figure out how you can have it all sorted out, here are a few things that you must know about cleaning the papablic bottle sterilizer.
How to Clean Papablic Bottle Sterilizer?
1. Disassemble it
The first and most extensive method to get it sorted out is to ensure that you are disassembling it properly, to get it sorted out. However, you will have to ensure that you are washing your hands thoroughly before getting it all done since you will not want any infestation on the sterilizer that you have. After you get it disassembled completely, you will need to use a clean wet wipe to clean the top and the container on it.
The container can be taken off as well, and that will be helping you to clean it up properly. So, take off the cover first and then wipe it clean. Afterward, you will need to take the container off too, and you can either soak it in the clean water or use lukewarm water to clean it with a clean wipe. That should be doing the trick for you. Just make sure that you are not getting any water into the base and that will be good for you to take care of it.
Lastly, you need to be careful about the white solid build-up on the sterilizer, as it is not harmful to health, but if it increases, it can cause you to have certain problems. That is why you need to use a mixture of vinegar and water to clean it up properly and that should be doing the trick for you.
2. Run an empty cycle
Another possible way for you to get it sorted out is to run an empty cycle on it. That will be cleaning the sterilizer internally for you and you will not have to face any sort of problems with the germ or bacteria build-up inside the sterilizer. To get that sorted out, you will need to wait for the sterilizer to properly cool down.
Then, you can empty it out by taking all those bottles and other parts that you might have put inside the sterilizer. Then, you will need to keep the switch on steam first so that it can have appropriate steam inside for evaporation. Afterward, you will need to run the heat cycle and that will be allowing you to have the right edge of protection and cleanliness on the sterilizer itself.
3. Wipe the body
You also need to know that the body on the outside can also have dust, or moisture build-up up it and you will need to take care of it optimally if you wouldn’t want it to have issues with discoloration or bacteria building upon it. Especially if you are running a dry cycle on it to clean it off, you should be cleaning the outside in order to get it sorted out. To do that, you will need to use a sponge along with some cold water and that should be allowing you to wipe off all the dust build-up that might be there on your Papablic bottle sterilizer.
Be mindful that you will need to clean it regularly, and once a week should be enough to have the job done for you keeping it clean.