Miele is a famous brand that is known for manufacturing some of the best dishwashers for its users. The company has a huge lineup that people can check by visiting their website. This allows them to select from a wide range of devices. The process also helps in ensuring that you get the best possible device for yourself.
Although, you should note that some devices are required in your kitchen. While these are not necessary, having them can still be quite useful. Considering this, one of the most common devices that you will notice people using are the dishwashers from Miele.
These come with tons of features but there are also some issues that you can run into. Recently people have been complaining that the Miele Dishwasher won’t drain. If you are getting the same problem, then here are some simple troubleshooting steps that can be used to fix it.
Fixing Miele Dishwasher Won’t Drain
- Check Filter
Although, it is still necessary that you take proper precautions when using them and keep the devices maintained. This helps in ensuring that these don’t run into any problems for a long time. If you notice that your Miele dishwasher is already running into issues, then identifying the root of the problem is necessary.
When it comes to the drain not working, the first thing that you should check is the filter used on these appliances. This is installed to prevent debris and gunk from passing through and entering the pipelines. Considering this, make sure that you clean this frequently as the filter will get clogged without it. The only thing that you have to do is open the device and clean the filter.
- Drain Hose Is Clogged
If you are still getting the same problem, then there is a high chance that your drain hose is clogged. This is the pipeline that is used to throw out all the waste from the device. Considering this, if anything passes through the filter then it has a high chance of getting stuck inside the drain hose.
People should always their filters with new ones if they notice that these have gotten damaged. If you had not done this, then your drain hose is most likely clogged and requires a cleanup. You will first have to find the location of the drain hose which varies from model to model.
If you are having trouble finding it then use the manual for your dishwasher to help you out. Finally, once you find the drain hose start cleaning it. Make sure that you remove all the gunk and debris stuck inside it. You might also have to use water during this process.
- Drain Hose Bent
Another reason for this problem can be that the drain hose for your dishwasher was bent. The pipe is usually made from materials that can bend easily. This helps in installing the device in an optimal location where you can easily route the drain hose.
Although, you should note that this material can easily form bends on it. If you had put too much pressure on the pipe, then it might have bent. Considering this, find the point where it is bending and fix it.
- Faulty Device
Usually, the steps mentioned above should fix the problem you were getting. Although, if you are still getting the same issue then the first thing that you should do is contact the support team for Miele. Notify them about your problem in detail and wait for their answer.
If some part is damaged, then you will have to take your device to the company for repairs. However, if a small part requires a replacement, then the support team might send it to you. People can then easily install these on their own without much trouble.