Even though most of the newer models can be a bit expensive, they bring a ton of new features to your kitchen. These features won’t only make cooking more enjoyable, but you won’t have to spend as much time in the kitchen. Brands like Amana have dominated the market for many years with their exceptional range of kitchen appliances. If you don’t know much about good options, then this brand might be a good place to start.
With that said, even the best products can sometimes malfunction. A lot of people have recently come forward with questions about the common problems they can expect in the Amana Gas Stove igniter. So, let’s cover a few issues that you might have to deal with while using the Amana stove.
Amana Gas Stove Igniter Problems
1. Clicking Noise
One of the most common issues that you will run into with your Amana Gas Stove igniter is that stove will keep clicking for an extended period of time. The clicking noise can be traced back to the basic functioning of the igniter as it is trying to light up the gas that is built up in the chamber. So, if the stove lights up after a few seconds of clicking, then there is not much to worry about.
However, if you have been hearing a clicking noise for a long time and then hear a small explosion before the stove lights up, then you’re dealing with igniter issues. The best thing that can be done in this situation is to replace the igniter in the stove.
Replacing the heating element or the gas chamber will take just as much effort, and the igniter replacement is quite affordable. So, you shouldn’t bother with other solutions and install an igniter replacement. As long as there are no issues with the gas supply, the igniter issues will be fixed at this stage. Hopefully, that will help you better manage the clicking noise in your unit.
2. Stove Not Lighting Up
Another problem that quite a few users have reported is that the gas stove won’t light up even after the hissing of gas in the ignition chamber. In this situation, if you’re not hearing any clicking from the chamber and only the gas is hissing, then there is something wrong with the spark mechanism of the igniter.
It is probable that the igniter has gone bad, and the size of the spark is not big enough to light up the gas in the chamber. In this situation, there is not much that can be done except replace the igniter in the Amana gas stove. So, make sure to call a mechanic or access the igniter to install the replacement.
Luckily, the installation procedure is quite straightforward, and you won’t have any extensive issues while trying to manage the igniter unit in your Amana stove. With that said, if you’re confused about any step or have lost the owner’s manual, then try seeking help from professionals working at Amana customer support.
3. No Gas in Chamber
Even though the igniter assembly is in an isolated location in the stove, it is not too rare for debris to plug up the gas chamber. Once the gas chamber is plugged, the supply is cut off, and there is nothing for the igniter to spark. In this situation, you won’t hear any hissing noise from the unit even though the igniter is clicking.
If that is the case, then you won’t have to worry as much about the igniter. Your main focus should be on cleaning the debris from the gas chamber and checking the machine again. You can perform this troubleshooting step by using a toothpick or a needle to clean out the debris. Some people have also mentioned good results with the use of pressured air. So, you can use a wide range of options to clean out the gas chamber.
After the chamber is clean, you need to put the igniter assembly back in its place and try lighting up the stove again. Hopefully, you will hear the hissing noise coming from the gas chamber, and the igniter will light up the gas. With that said, make sure to reach out to customer support in case of unique issues with your Amana Gas Stove igniter.