There was a time when refrigerators were the must-have kitchen appliance, but with the advancement in technology, many people have made ice makers crucial for their kitchen. In fact, some people invest in high-end refrigerators that come with built-in ice makers. However, this appliance isn’t as simple as it looks and often shows problems. One such problem is Whirlpool ice maker clumping and it’s a pretty frustrating issue. So, with this post, we are sharing the easiest solutions with you!
How to Fix Whirlpool Ice Maker Clumping?
1. Usage
First of all, you need to understand that electronic appliances aren’t meant for storage. Many people make the mistake of purchasing the ice makers and never using them. That being said, if your ice maker is clumping, it could be because you haven’t been using the ice maker. When it’s not used for some time, it will clump up and fuse. The solution to this problem is pretty straightforward since you only need to break these clumps with a plastic spoon and you are good to go. For future reference, use the electronics!
2. Door
This is the most common cause in homes where there are kids. This is because when the door is left open for a long time, it will let in the humid air which results in clumping. For this reason, you need to ensure that the door is only opened when you need it to be open to ensure minimal humid air goes inside. On the other hand, if you don’t open the door for an extended time already, it’s time to check the gasket. This is because if the gasket is not installed properly, it will let the air in and cause clumping. So, you must check these two issues and ensure no external humid air is entering the ice maker.
3. Ice Bin
It’s needless to say that an ice maker is designed with an ice bin to catch the wasted ice. However, it doesn’t mean that you will never clean this bin or it will result in clumping. This is because if the ice bin is not cleaned regularly, the ice particles will start building up, resulting in clumping. So, take out the ice bin and clean it with water (you can also use a soft cloth to wipe it clean). Once you are done cleaning, make sure that you dry it up before installing it again. To conclude, if you use the ice maker regularly, you will need to clean the ice bin on a weekly basis.
4. Temperature
What’s the point of an ice maker without proper and accurate temperature settings? The ice makers need to work at the lowest possible temperature settings. This is because if the temperature is higher, the ice starts melting and eventually clumps. So, now is the time to check the temperature and make sure it’s set to 0-degrees Celsius (you might need to set it even lower if you live in hotter surroundings).
All in all, these are the most suitable solutions, but if they don’t help, calling Whirlpool customer support would be a good choice!